SAP on Linux

Hi..

i am new to linux, i have SAP ECC 6.0 SR3 with oracle 10.2g , want to install SAP on Linux RHEL.

i can install SAP on windows very easily.

please refer me the link or Note that guide me step by step installation of SAP on Linux.

and also advise me which RHEL 4 , 5 , 5.1....... etc version is Suitable for SAP ECC 6.0 SR3

best regard

Imran Khan

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Accepted Solutions (1)

As said download the installation guide available on Service Marketplace from

https://websmp202.sap-ag.de/erp-inst

Rohit

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Thanks Rohit,

After a very long time u answar me

Take Care

Best regard

Khan

Hi Imran,

A good start into SAP on Linux, beside looking for compatibility on PAM, is the following SDN site: https://www.sdn.sap.com/irj/sdn/linux. You can find lots of useful information in the sub section 'Key Topcis'.

Important notes are the SAP on Linux Master Note and others which are:

SAP software on Linux: Essential comments (Note 171356)

SAP memory management for 64-bit Linux systems (Note 941735)

SAP memory management for Linux - 32-bit (Note 386605)

Red Hat Enterprise Linux 5: Installation and Upgrade (Note 1048303)

SUSE LINUX Enterprise Server 10: Installation notes (Note 958253)

SUSE LINUX Enterprise Server 9: Installation notes (Note 797084)

Red Hat Enterprise Linux 3 and 4: Installation and upgrade (Note 722273)

SUSE LINUX Enterprise Server 8: Installation notes (Note 767814)

Red Hat Enterprise Linux 2.1: Notes on installation (Note 625674)

Hope this helps you.

Kind regards,

Andre Condne

thanks All

i find the guide to install SAP on linux (note: 171356)

Regard

Khan

Hi..

Now i am installation RHEL-5.1 , plz tell me the parition & their sizes that i create for OS ,SAP, Oracle etc,

Database-Oracle, SAP-ECC 6.0 SR3,

Hdd Space is 500GB.

these three partitions are enough

/ (root) , boot & SWAP

Best Regard

Khan

Hi all

i have installed RHEL-5 and set JAVA environment Varial for SIDadm user,

when i start installation of SAP through this command

./sapinst

this shows error

"-bash: ./sapinst: Permission denied"

while i am installing SAP by login root user

plz guide me how can i resolve this issue

Best Regard

Khan

> # ./sapinst

> this shows error

> "-bash: ./sapinst: Permission denied"

> while i am installing SAP by login root user

Did you unpack the DVDs on a Windows machine?

Try

cd <installation-DVD>
chmod -Rf 775 *

Then try to start sapinst again.

Markus

Edited by: Markus Doehr on May 7, 2009 11:50 AM

Thanks Markus

there was permissin problem , permission was read only, i have given read + write

now sapinst has started , but after execution it stop at for logtime

"guiengin : no gui server connected waiting for a connection on host 21200 to continue"

while i have install java vesion jre1.4.0_12 in /usr/java

and set variable in

$ vi ~/.bash_profile

export JAVA_HOME=/usr/java/jre1.4.0_12/bin/java

export PATH=$PATH:/usr/java/jre1.4.0_12/bin/java

Plz tell me how can resolve that issue

Best Regard

Imran

> "guiengin : no gui server connected waiting for a connection on host 21200 to continue"

Is you DISPLAY variable set? You can't install without being in graphical mode.

> while i have install java vesion jre1.4.0_12 in /usr/java

That version is not supported.

You need to install

for a 32bit Linux system the Sun JDK 1.4.2

See Note 716604 - Access to Sun J2SE and recommended J2SE options

for 64bit Linux system the IBM JDK 1.4.2

Note 1172419 - Linux: Supported Java versions on the x86_64 platform

Markus

thanks

ok i install for java for "64bit Linux system the IBM JDK 1.4.2"

plz tell me one thing more is installation path of java JDK 1.4.2 " /usr/java "is correct &

variable setting in

vi ~/.bash_profile (for root & <sid>adm user)

is coccect?

Best regard

Imran

> plz tell me one thing more is installation path of java JDK 1.4.2 " /usr/java "is correct &

> variable setting in

> vi ~/.bash_profile (for root & <sid>adm user)

Usually it's not necessary to set the JAVA_HOME anywhere but in the shell you're executing the sapinst. In normal cases <sid>adm is not yet existing.

You can do that - it's not a problem.

Markus

hi..

i have installed "j2sdk-1_4_2_19-linux-i586.bin" in /usr/java and also set display variable

display=hostname:0.0

but when i execuite # ./sapinst

error is same

no GUI Server connected : waiting for connection on host , port 21200 to continue with the installation

i am stuck at this point

Best regard

Imran

Can you start

xclock?

Markus

hi,

i think it is start, because when enter command "xclock" it open clock fine.

if this is not enogh to start xclock then tell me some thing more.

best regard

Imran

Then you X server configuration seems to be ok.

sapinst should come up. Make sure you deactivated the firewall on the box.

Markus

thanks Markus

sapinst GUI started, if required any input then tell u later

best regard

imran

hi..

an error occure at Installation export 1 step

"An eroor occurred while processing serivce SAP ERP6.0 SR3>SAP SYSTEM>Oracle >central System(Last error reported by the step:the evaluator class CCdCheckUserinput is missing in the registry)

choose retry , view log & stop "

i have retry # of time but all in vain

plz tell what is wrong with it

Best regard

Imran

hi markus

an error occure at Installation export 1 step

"An eroor occurred while processing serivce SAP ERP6.0 SR3>SAP SYSTEM>Oracle >central System(Last error reported by the step:the evaluator class CCdCheckUserinput is missing in the registry)

choose retry , view log & stop "

i have retry # of time but all in vain

plz tell what is wrong with it

Best regard

Imran

hi..

there was problem with Export DVD dumps, i dump that again, now installation is in progress

thanks again

Best regard

Imran

Please post the last lines of sapinst_dev.log

Markus

where this log file present (sapinst_dev.log)

durring installing oracle db this error come after prereqs pass

All installer requirements met.

Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-05-12_08-15-57PM. Please wait ...r3dsap:orar3d 14> Oracle Universal Installer, Version 10.2.0.1.0 Production

Xlib: connection to ":0.0" refused by server

Xlib: No protocol specified

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

:0.0

OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.

OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:

- For csh: % setenv DISPLAY 192.168.1.128:0.0

- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY

Use the following command to see what shell is being used:

echo $SHELL

Use the following command to view the current DISPLAY environment variable setting:

echo $DISPLAY

- Make sure that client users are authorized to connect to the X Server.

OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:

% xhost +

To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':

% <full path to xclock... see below>

If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.

Typical path for 'xclock': '/usr/X11R6/bin/xclock'

set DISPLAY=10.0.0.88:0.0; export DISPLAY

export: Command not found.

r3dsap:orar3d 15> set DISPLAY=10.0.0.88:0.0; export DISPLAY

export: Command not found.

r3dsap:orar3d 16> set DISPLAY=10.0.0.88:0.0

r3dsap:orar3d 17> xclock

Xlib: connection to ":0.0" refused by server

Xlib: No protocol specified

Error: Can't open display: :0.0

while through root user i have set DISPLAY variable , & i can open xclock windows

plz tell where is the problem

best regard

Imran

> r3dsap:orar3d 15> set DISPLAY=10.0.0.88:0.0; export DISPLAY

> export: Command not found.

> r3dsap:orar3d 16> set DISPLAY=10.0.0.88:0.0

> r3dsap:orar3d 17> xclock

> Xlib: connection to ":0.0" refused by server

> Xlib: No protocol specified

> Error: Can't open display: :0.0

this is csh (not bash) so you need to use

setenv DISPLAY 10.0.0.88:00

and

as user root (if you're logged on as root to the console you have to execute)

xhost +

Markus

> while through root user i have set DISPLAY variable , & i can open xclock windows

> plz tell where is the problem

> best regard

> Imran

as orar3d user i have set DISPLAY variable as under

r3dsap:orar3d 33> setenv DISPLAY 10.0.0.88:0.0

as root user

[root@r3dsap ~]# xhost +

access control disabled, clients can connect from any host

this error comes

regard

Imran

after that when i execuite "xclock" as orar3d user this error come

r3dsap:orar3d 33> xclock

Error: Can't open display: 10.0.0.88:00

> [root@r3dsap ~]# xhost +

> access control disabled, clients can connect from any host

> this error comes

This is not an error but expected - it's an informational message.

Markus

> r3dsap:orar3d 33> xclock

> Error: Can't open display: 10.0.0.88:00

Wrong - this should be

10.0.0.88:0.0

I HIGHLY suggest getting someone on your side to help you with a bit of basic Unix knowledge... (no offense).

Markus

i have done these things

r3dsap:orar3d 46> setenv DISPLAY 10.0.0.88:0.0

r3dsap:orar3d 47> echo $DISPLAY

[root@r3dsap bin]# xhost +

access control disabled, clients can connect from any host

r3dsap:orar3d 49> xclock

Error: Can't open display: 10.0.0.88:0.0

now it is showing 10.0.0.88:0.0

regards

Imran

> r3dsap:orar3d 46> setenv DISPLAY 10.0.0.88:0.0

> r3dsap:orar3d 47> echo $DISPLAY

> [root@r3dsap bin]# xhost +

> access control disabled, clients can connect from any host

> r3dsap:orar3d 49> xclock

> Error: Can't open display: 10.0.0.88:0.0

> now it is showing 10.0.0.88:0.0

Yes - but the display doesn't seem to be right.

What's the output of

echo $DISPLAY

as user root just when you opened a new terminal?

Markus

r3dsap:orar3d 1> echo $DISPLAY

10.0.0.88:0.0

[root@r3dsap ~]# xhost +

access control disabled, clients can connect from any host

r3dsap:orar3d 2> xclock

Error: Can't open display: 10.0.0.88:0.0

Is your firewall disabled?

Markus

Yes SELinux and Firewall is disable

and you are logged on to the GRAPHICAL console as user root? What is the output of

echo $DISPLAY

as user root?

Markus

as root user

#echo $DISPLAY

0.0

Try to set that the same as user ora<SID>.

Markus

i have set DISPLAY variable both for ora<SID> & root user

now the result is for both user like

echo $DISPLAY

10.0.0.88:0.0

as ora<sid> user

>xclock

error : can't open dispaly: 10.0.0.88:0.0

error is same

one thing more i am installtion SAP on VMware , is it require diffrent setting for x11 server

Don't set it as root.

use the value from the root user for the ora<SID> user. if that is not working I'm out of ideas, I've done this a thousand times before and it was working, no idea why your box is so resistant.

Markus

now i have close all the open teminal

open a new termial as root user and enter comman

xclock (it open the clock windows)

then su orar3d and enter comman

xclock (now it opened the clock windows)

but with this warning:Tried to connect to session manager, Authentication Reject, reason:

none of the authentication protocols specified are supported and host-base authentication failed

but before this i have change rights in /etc/passwd

0 0 as root user

but this setting not ok

back set it as it was

Edited by: Imran Khan on May 13, 2009 1:13 PM

now I have RUNINSTALLER again its now open that windows for Oracle Installation

thanks gain

after closing all terminal with new teminal as ora<sid> xclock started ,and then RUNINSTALLER is also started,

now i am at 24 step "start instance" here error occurred

(Last error reported by the step : Instance R3D?DVEBM GS00 reached state SHUTDOWN after having state STARTING. Giving up)

you may now retry , view log & stop

same error is in log, i have retry # of time but no success

plz tell something more i am near to complete SAP installation on LINUX due to ur too much help

regard

Imran

at 24 step "start instance" number of time i retried but no success , now i have stop installation & start it with old installation, again at 24 it stoped . but error has been changed

WARNING 2009-05-14 18:39:37.614 [iaxxcmsclient.cpp:93]

CIaMsgClient::CIaMsgClient(r3dsap, 3900)

Connect to message server (r3dsap/3900) failed: NIECONN_REFUSED.

WARNING 2009-05-14 18:39:57.767 [iaxxcmsclient.cpp:93]

CIaMsgClient::CIaMsgClient(r3dsap, 3900)

Connect to message server (r3dsap/3900) failed: NIECONN_REFUSED.

ERROR 2009-05-14 18:39:57.774

CJSlibModule::writeError_impl()

CJS-30087 Instance R3D/DVEBMGS00 [ABAP: MSNOTRUNNING] did not stop after 5:20 minutes. Giving up.

ERROR 2009-05-14 18:39:58.92 [sixxcstepexecute.cpp:951]

FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11

|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR ( Last error reported by the step :Instance R3D/DVEBMGS00 [ABAP: MSNOTRUNNING] did not stop after 5:20 minutes. Giving up.).

plz guide

Regard

Imran

Please check the logfiles

dev_ms

dev_disp

dev_w0

in /sapmnt/<SID>/work

Markus

i find that file these r not in /sapmnt/<SID>/work

these r in /usr/sap/<SID>/DVEBMSGS00/work

what entry in look in them

Please post them (especially dev_ms).

And please. put code tags around them if you post logfiles; this means: post the content here, mark the text and press on the << >> sign next to the underline button. This makes them readable.

Markus

trc file: "dev_ms", trc level: 1, release: "700"

[Thr 46912499304720] Thu May 14 15:20:51 2009

[Thr 46912499304720] MsSSetTrcLog: trc logging active, max size = 20971520 bytes

systemid 390 (AMD/Intel x86_64 with Linux)

relno 7000

patchlevel 0

patchno 137

intno 20050900

make: multithreaded, Unicode, 64 bit, optimized

pid 12172

[Thr 46912499304720] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 12172) [msxxserv_mt. 1832]

[Thr 46912499304720] SigISetDefaultAction : default handling for signal 17

[Thr 46912499304720] Thu May 14 15:20:52 2009

[Thr 46912499304720] load acl file = /usr/sap/R3D/SYS/global/ms_acl_info

[Thr 46912499304720] MsGetOwnIpAddr: my host addresses are :

[Thr 46912499304720] 1 : [127.0.0.1] r3dsap (HOSTNAME)

[Thr 46912499304720] 2 : [192.168.122.1] 192.168.122.1 (NILIST)

[Thr 46912499304720] 3 : [10.0.0.88] 10.0.0.88 (NILIST)

[Thr 46912499304720] MsHttpInit: full qualified hostname = localhost.localdomain

[Thr 46912499304720] HTTP logging is switch off

[Thr 46912499304720] set HTTP state to LISTEN

[Thr 46912499304720] MsHttpOwnDomain: own domain[1] = localdomain

[Thr 46912499304720] ms/icf_info_server : deleted

[Thr 46912499304720] *** I listen to port sapmsR3D (3600) ***

[Thr 46912499304720] *** I listen to internal port 3900 (3900) ***

[Thr 46912499304720] *** HTTP port 8100 state LISTEN ***

[Thr 46912499304720] CUSTOMER KEY: >X0892162840<

[Thr 46912499304720] Thu May 14 15:33:03 2009

[Thr 46912499304720] *** ERROR => MsSCheckConnections: no response from client C1 (127.0.0.1) after 300 secs received [msxxserv_mt. 3173]

[Thr 46912499304720] *** ERROR => MsSCheckConnections: disconnect now [127.0.0.1] [msxxserv_mt. 3177]

[Thr 46912499304720] -

C-STACK -

(CTrcStack2+0x78)[0x47fa88]

(SigIGenAction+0x2a3)[0x526253]

/lib64/libpthread.so.0[0x3b09c0de60]

/lib64/libc.so.6(__poll+0x2f)[0x3b090c585f]

(SiPoll+0x1d)[0x4cbebd]

(_ZN10SISEL_POLL6selectEiPj+0x55)[0x4d61a5]

(_ZN10NISEL_IMPL9selectIntEiPjPh+0xd3)[0x4c98a3]

(_ZN10NISEL_IMPL6selectEiPj+0x39)[0x4c84f9]

(NiSelSelect+0x17)[0x4c75d7]

(nlsui_main+0x2e8)[0x43b598]

(main+0x2b)[0x43c2eb]

/lib64/libc.so.6(__libc_start_main+0xf4)[0x3b0901d8a4]

[Thr 46912499304720] -

[Thr 46912499304720] Thu May 14 16:07:05 2009

[Thr 46912499304720] ***LOG Q0E=> SigIGenAction, signal ( 15) [sigux_mt.c 935]

[Thr 46912499304720] ***LOG Q02=> MsSHalt, MSStop (Msg Server 12172) [msxxserv_mt. 5949]

[Thr 46912499304720] -

C-STACK -

(CTrcStack2+0x78)[0x47fa88]

(SigIGenAction+0x2a3)[0x526253]

/lib64/libpthread.so.0[0x3b09c0de60]

/lib64/libc.so.6(__poll+0x2f)[0x3b090c585f]

(SiPoll+0x1d)[0x4cbebd]

(_ZN10SISEL_POLL6selectEiPj+0x55)[0x4d61a5]

(_ZN10NISEL_IMPL9selectIntEiPjPh+0xd3)[0x4c98a3]

(_ZN10NISEL_IMPL6selectEiPj+0x39)[0x4c84f9]

(NiSelSelect+0x17)[0x4c75d7]

(nlsui_main+0x2e8)[0x43b598]

(main+0x2b)[0x43c2eb]

/lib64/libc.so.6(__libc_start_main+0xf4)[0x3b0901d8a4]

[Thr 46912499304720] -

[Thr 46912499304720] Thu May 14 16:07:12 2009

[Thr 46912499304720] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c 935]

[Thr 46912499304720] ***LOG Q02=> MsSHalt, MSStop (Msg Server 12172) [msxxserv_mt. 5949]

trc file: "dev_w0", trc level: 1, release: "700"

ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ

M sysno 00

M sid R3D

M systemid 390 (AMD/Intel x86_64 with Linux)

M relno 7000

M patchlevel 0

M patchno 144

M intno 20050900

M make: single threaded, Unicode, 64 bit, optimized

M pid 12182

M Thu May 14 15:20:53 2009

M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)

M length of sys_adm_ext is 576 bytes

M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 12182) [thxxhead.c 1281]

M ThInit: running on host r3dsap

M calling db_connect ...

C Thu May 14 15:20:54 2009

C Oracle Client Version: '10.2.0.2.0'

C Client NLS settings: AMERICAN_AMERICA.UTF8

C Logon as OPS$-user to get SAPSR3's password

C Connecting as /@R3D on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch

C 0 UTF8 1 0x12a62170 0x12a69c20 0x12a7a378

C Attaching to DB Server R3D (con_hdl=0,svchp=0x12a7a2a8,srvhp=0x12a7c5e8)

C Starting user session (con_hdl=0,svchp=0x12a7a2a8,srvhp=0x12a7c5e8,usrhp=0x12a6a438)

C Now '/@R3D' is connected (con_hdl 0, nls_hdl 0).

C Got SAPSR3's password from OPS$-user

C Disconnecting from connection 0 ...

C Closing user session (con_hdl=0,svchp=0x12a7a2a8,usrhp=0x12a6a438)

C Now I'm disconnected from ORACLE

C Connecting as SAPSR3/<pwd>@R3D on connection 0 (nls_hdl 0) ... (dbsl 700 250407)

C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch

C 0 UTF8 1 0x12a62170 0x12a69c20 0x12a7a378

C Starting user session (con_hdl=0,svchp=0x12a7a2a8,srvhp=0x12a7c5e8,usrhp=0x12a6a438)

C Now 'SAPSR3/<pwd>@R3D' is connected (con_hdl 0, nls_hdl 0).

C Database NLS settings: AMERICAN_AMERICA.UTF8

C DB instance R3D is running on r3dsap with ORACLE version 10.2.0.1.0 since MAY 14, 2009, 03:14:23

B Connection 0 opened (DBSL handle 0)

B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost

B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090514 152053 r3dsap

M db_connect o.k.

M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif

I MtxInit: 0 0 0

M SHM_PRES_BUF (addr: 0x2aaab0ba0000, size: 4400000)

M SHM_ROLL_AREA (addr: 0x2aabc6f0e000, size: 829849600)

M SHM_PAGING_AREA (addr: 0x2aabf8676000, size: 340131840)

M SHM_ROLL_ADM (addr: 0x2aaab0fd4000, size: 10683916)

M SHM_PAGING_ADM (addr: 0x2aac0cad6000, size: 2622496)

M ThCreateNoBuffer allocated 560152 bytes for 1000 entries at 0x2aac0cd59000

M ThCreateNoBuffer index size: 3000 elems

M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x2aac13827000

X EmInit: MmSetImplementation( 2 ).

X MM global diagnostic options set: 0

X <ES> client 0 initializing ....

X Using implementation map

X Linux: Kernel supports shared memory disclaiming

X Linux: using madvise(<pointer>, <size>, 9).

X Linux: disclaiming for shared memory enabled

X ES initialized.

B Thu May 14 15:20:55 2009

B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1

B Thu May 14 15:20:56 2009

B dbtbxbuf: Buffer TABL (addr: 0x2aac1382a100, size: 30000000, end: 0x2aac154c6480)

B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1

B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5

B dbtbxbuf: protect_shm = 0, force_checks = 0

B dbtbxbuf: tsize_retry = 14203520

B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]

B dbtbxbuf: Buffer TABLP (addr: 0x2aac154c7100, size: 10240000, end: 0x2aac15e8b100)

B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1

B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5

B dbtbxbuf: protect_shm = 0, force_checks = 0

B dbtbxbuf: tsize_retry = 5030272

B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]

B dbtbxbuf: Reading TBX statistics:

B dbtbxbuf: 1 object entries precreated

B Layout of EIBUF buffer shared memory:

B 0: 1 * 4 = 4

B 1: 1 * 464 = 464

B 2: 17 * 40 = 680

B 3: 4001 * 64 = 256064

B 4: 2000 * 256 = 512000

B 5: 4001 * 8 = 32008

B 6: 1 * 200 = 200

B 7: 65 * 8 = 520

B 8: 13251 * 256 = 3392256

B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B dbexpbuf: Buffer EIBUF (addr: 0x2aac15e8b108, size: 4194304, end: 0x2aac1628b108)

B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]

B Layout of ESM buffer shared memory:

B 0: 1 * 4 = 4

B 1: 1 * 464 = 464

B 2: 17 * 40 = 680

B 3: 4001 * 64 = 256064

B 4: 2000 * 256 = 512000

B 5: 4001 * 8 = 32008

B 6: 1 * 200 = 200

B 7: 65 * 8 = 520

B 8: 13251 * 256 = 3392256

B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B dbexpbuf: Buffer ESM (addr: 0x2aac1628c108, size: 4194304, end: 0x2aac1668c108)

B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]

B Layout of CUA buffer shared memory:

B 0: 1 * 4 = 4

B 1: 1 * 464 = 464

B 2: 17 * 40 = 680

B 3: 3001 * 64 = 192064

B 4: 1500 * 256 = 384000

B 5: 3001 * 8 = 24008

B 6: 1 * 200 = 200

B 7: 193 * 8 = 1544

B 8: 4822 * 512 = 2468864

B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B dbexpbuf: Buffer CUA (addr: 0x2aac0fd66108, size: 3072000, end: 0x2aac10054108)

B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]

B Layout of OTR buffer shared memory:

B 0: 1 * 4 = 4

B 1: 1 * 464 = 464

B 2: 17 * 40 = 680

B 3: 4001 * 64 = 256064

B 4: 2000 * 256 = 512000

B 5: 4001 * 8 = 32008

B 6: 1 * 200 = 200

B 7: 81 * 8 = 648

B 8: 13250 * 256 = 3392000

B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000

B dbexpbuf: Buffer OTR (addr: 0x2aac1668d108, size: 4194304, end: 0x2aac16a8d108)

B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]

B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#9 @ 2274] [dbcalbuf2274 ]

B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):

B max_blocking_factor = 5, max_in_blocking_factor = 5,

B min_blocking_factor = 5, min_in_blocking_factor = 5,

B prefer_union_all = 0, prefer_join = 0,

B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,

B convert AVG = 0, alias table FUPD = 0,

B escape_as_literal = 1, opt GE LE to BETWEEN = 0,

B select * =0x0f, character encoding = STD / <none>:-,

B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,

B rule_fae->0, concat_fae->0, concat_fae_or->0

M Thu May 14 15:20:57 2009

M SecAudit(RsauInit): Start init of Security Audit Log for first wp.

M SecAudit(RsauInit): Shared memory for Security Audit Log already exists.

M SecAudit(RsauInit): Re-initialize with new profile parameters

M SecAudit(RsauShmInit): SCSA size................ = 4096

M SecAudit(RsauShmInit): addr of SCSA............. = 0x2aaab7048000

M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x2aaab7048768

M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x2aaab70487a0

M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x2aaab70487ac

M SecAudit(RsauShmInit): SHM version.............. = 5

M SecAudit(RsauShmInit): SHM Slot version......... = 2

M SecAudit(RsauShmInit): RSAU active.............. = 0

M SecAudit(RsauShmInit): number of slots possible. = 10

M SecAudit(RsauShmInit): number of slots requested = 2

M SecAudit(RsauShmInit): number of slots used..... = 2

M SecAudit(RsauShmInit): user selection........... = 0

M SecAudit(RsauShmInit): max size of one file..... = 0 KB

M SecAudit(RsauShmInit): max size of all files.... = 102400 KB

M SecAudit(RsauGetCurrentProfile): Init of shared memory completed

M SecAudit(RsauGetCurrentProfile): Security Audit Log not active

M SsfSapSecin: automatic application server initialization for SAPSECULIB

N SsfSapSecin: Looking for PSE in database

N SsfPseLoad: started...(path=/usr/sap/R3D/DVEBMGS00/sec, AS=r3dsap, instanceid=00)

N SsfPseLoad: ended (0 of 0 sucessfully loaded, 0 checked...

N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.

N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.

M Thu May 14 15:21:03 2009

M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

S *** init spool environment

S initialize debug system

T Stack direction is downwards.

T debug control: prepare exclude for printer trace

T new memory block 0x12bebeb0

S spool kernel/ddic check: Ok

S using table TSP02FX for frontend printing

S 1 spool work process(es) found

S frontend print via spool service enabled

S printer list size is 150

S printer type list size is 50

S queue size (profile) = 300

S hostspool list size = 3000

S option list size is 30

S found processing queue enabled

S found spool memory service RSPO-RCLOCKS at 0x2aac10056070

S doing lock recovery

S setting server cache root

S found spool memory service RSPO-SERVERCACHE at 0x2aac100566a0

S using messages for server info

S size of spec char cache entry: 297032 bytes (timeout 100 sec)

S size of open spool request entry: 2272 bytes

S immediate print option for implicitely closed spool requests is disabled

ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ

M -

C-STACK -

(CTrcStack2+0x78)[0x6b7778]

(CTrcStack+0xb)[0x6b7d7b]

(DpTrcOnOff+0x432)[0x4dd632]

/lib64/libpthread.so.0[0x3b09c0de60]

(strcmpU16+0x7)[0x177ad47]

(DpShmPrfSearchByName+0xab)[0x4fbdab]

(DpShmPrfSetFuncByName+0x1fd)[0x4fdffd]

(ThStartUp2+0x78)[0x6544d8]

(ThInit+0xfb5)[0x54d4b5]

(ThStart+0x117)[0x54f287]

(DpMain+0x2da)[0x4b8b6a]

(nlsui_main+0x9)[0x48fe29]

M Thu May 14 15:22:50 2009

M DpSigInt: caught signal 2

M SigICallExitRoutine: call exithandler (ThSigHandler)

M ThSigHandler: call ThErrHandle

M in_ThErrHandle: 1

M ThSigHandler: signal (step 1, th_errno 11, action 2)

M ThIErrHandle: new stat of W0 is WP_SHUTDOWN

M ThIErrHandle: I'm during shutdown

M PfStatDisconnect: disconnect statistics

M ThIErrHandle: action changed to 2

M Entering ThSetStatError

M ThShutDownServer: shutdown server

M PfStatIndInit: Initializing Index-Record

M PfWriteIntoFile: copied shared buf (0 bytes) to local buf

M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M Entering ThReadDetachMode

M call ThrShutDown (1)...

M ***LOG Q02=> wp_halt, WPStop (Workproc 0 12182) [dpuxtool.c 260]

M Good Bye .....

You did not put code tags around the postings - try to read them - almost impossible

And:

you don't use a support database version.

If you would have read the installation guide you would have noticed that

- Oracle 10.2.0.1 is not support

- you need to install 10.2.0.1 and update to the latest patchlevel

- you need to install all necessary interim patches for the patchlevel you installed

The version 10.2.0.1 has known bug, serious bugs. If loaded the system with "-loadprocedure fast" it's very likely, that you have corrupt blocks.

Your kernel is crashing:

M  ------------------ C-STACK ----------------------
(CTrcStack2+0x78)[0x6b7778]
(CTrcStack+0xb)[0x6b7d7b]
(DpTrcOnOff+0x432)[0x4dd632]
/lib64/libpthread.so.0[0x3b09c0de60]
(strcmpU16+0x7)[0x177ad47]
(DpShmPrfSearchByName+0xab)[0x4fbdab]
(DpShmPrfSetFuncByName+0x1fd)[0x4fdffd]
(ThStartUp2+0x78)[0x6544d8]
(ThInit+0xfb5)[0x54d4b5]
(ThStart+0x117)[0x54f287]
(DpMain+0x2da)[0x4b8b6a]
(nlsui_main+0x9)[0x48fe29]

Did you install and update your RHEL installation to the requirements?

Markus

sorry i did not understand code tags, that why this heppend , sorry

now plz tell me what can i do ,

start installation again of SAP then oracle then patch ?

which patch i install 10.0.2.2 or 10.0.2.4 ?

in sap note i read that RHEL-5 generate error prereq. fail

for this edit oraparam.ini , include redhat-5

> sorry i did not understand code tags, that why this heppend , sorry

I wrote in a previous reply - do you actually read what I'm writing??

>> And please. put code tags around them if you post logfiles; this means: post the content here, mark the text and press on the << >> sign next to the underline button. This makes them readable.

> now plz tell me what can i do ,

> start installation again of SAP then oracle then patch ?

I would start from scratch - yes.

> which patch i install 10.0.2.2 or 10.0.2.4 ?

Go for the latest patch 10.2.0.4 plus all the interim patches. The necessary notes are in the installation guide listed.

Markus

i have download oracle patch 10.2.0.4 for linux , these r three bin files,

.........aa.bin

.........ab.bin

.........ac.bin

and made a zip file, unzip it and dump it to linux.

sapinst has stop and requiring oracle db.

edit oraparam.ini &include redhat-5

i am installing oracle

./RUNINSTALLER

installing oracle with default components

so plz tell me when i install patch 10.0.2.4

and wht are interim patches, how can get that , when i install them

this is PRODUCT-Specific prerequist Check results

Checking operating system requirements ...

Expected result: One of redhat-3,redhat-4,SuSE-9

Actual Result: redhat-Red Hat Enterprise Linux Server release 5.1 (Tikanga)

Check complete. The overall result of this check is: Failed <<<<

Problem: Oracle Database 10g is not certified on the current operating system.

Recommendation: Make sure you are installing the software on the correct platform.

=======================================================================

Checking operating system package requirements ...

Check complete. The overall result of this check is: Not executed <<<<

OUI-18001: The operating system 'Linux Version redhat-Red Hat Enterprise Linux Server release 5.1 (Tikanga)' is not supported.

Recommendation: Install the required packages before continuing with the installation.

=======================================================================

Checking security kernel parameters

Check complete. The overall result of this check is: Not executed <<<<

OUI-18001: The operating system 'Linux Version redhat-Red Hat Enterprise Linux Server release 5.1 (Tikanga)' is not supported.

Recommendation: Perform operating system specific instructions to update the kernel parameters, namely BIT_SIZE and noexec_user_stack.

=======================================================================

Checking Recommended glibc version

Check complete. The overall result of this check is: Not executed <<<<

OUI-18001: The operating system 'Linux Version redhat-Red Hat Enterprise Linux Server release 5.1 (Tikanga)' is not supported.

Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing packages.

=======================================================================

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 5312MB

Check complete. The overall result of this check is: Passed

=======================================================================

Checking available swap space requirements ...

Expected result: 5312MB

Actual Result: 20002MB

Check complete. The overall result of this check is: Passed

=======================================================================

Validating ORACLE_BASE location (if set) ...

Check complete. The overall result of this check is: Passed

=======================================================================

Checking for proper system clean-up....

Check complete. The overall result of this check is: Passed

=======================================================================

Checking for Oracle Home incompatibilities ....

Actual Result: NEW_HOME

Check complete. The overall result of this check is: Passed

=======================================================================

Answers (3)

problem has been solved

Specially thanks to Markus.

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

NOW i am installation SAP ON Linux may required some more inputs

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi,

Check for PAM for OS level related, and also download the installation guide as per the OS. In installation guide you can get all the details step by step.

Mahesh

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

thanks Mahesh

plz tell me the web link if u know , for PAM for OS level related & installation guide as per the OS.

Best Regard

Khan

Ask a Question

SAP on Linux

Accepted Solutions (1)

Accepted Solutions (1)

Answers (3)

Answers (3)

Re: ASEGURAMIENTO DE TABLAS

Re: Getting error while Creating role in BRM

Re: How to enable the add, delete,edit system on s...

Re: CJS-30252 Running priviledged function stop of...

Successfactors login issue.