ABAP Client Proxy to File (File is not getting generated)

[Former Member]

Hi All,

I'm trying out a scenario ABAP proxy --> XI --> FILE.

I have followed the given blog to create ABAP client proxy.

/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy

While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.

It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).

The directory path and the corresping file creation parameters also looks fine.

Couldn't figure out what went wrong. Please help me on this.

Thanks,

Ajay.

[Former Member]

Is there any solution further,,,? me too facing the same problem

[Former Member]

Hi vijaya,

I'm not using any content conversion in the receiver file adapter. As you said my configuration dumps the incoming xml msg a file.

Still cant find the root cause. Please help me with some other suggestions.

Thanks,

Ajay.

[Former Member]

Hi,

Recheck the path that you have specified in the target directory field in the receiver file adapter.

Regards,

Smitha.

[Former Member]

Hi Ajay:

Have you solved this problem? If yes, how?

I have the same problem too.

Thanks.

PR

[former_member185846]

Hi Smitha,

Please find below the Call Adapter trace

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Call Adapter

-->

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="T">Party normalization: sender</Trace>

<Trace level="1" type="T">Sender scheme external =</Trace>

<Trace level="1" type="T">Sender agency external =</Trace>

<Trace level="1" type="T">Sender party external =</Trace>

<Trace level="1" type="T">Sender party normalized =</Trace>

<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />

- <!-- ************************************

-->

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>

<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>

<Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>

<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>

<Trace level="2" type="T">Remote address = 10.191.117.166</Trace>

<Trace level="1" type="T">COMMIT is done by XMB !</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />

- <!-- ************************************

-->

<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>

<Trace level="3" type="T">Getting type of XMB...</Trace>

<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />

<Trace level="2" type="T">XMB kind = CENTRAL</Trace>

<Trace level="3" type="T">Start pipeline found</Trace>

<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">

<Trace level="3" type="T">No triggers found. OK.</Trace>

</Trace>

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="3" type="T">system-ID = NW2</Trace>

<Trace level="3" type="T">client = 100</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = XIAPPLUSER</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>

<Trace level="1" type="T">PLNAME = CENTRAL</Trace>

<Trace level="1" type="T">QOS = EO</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />

- <!-- ************************************

-->

<Trace level="3" type="T">QOS = EO</Trace>

<Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>

<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">

<Trace level="3" type="T">External PLID = CENTRAL</Trace>

<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>

</Trace>

<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>

<Trace level="3" type="T">Generate prefixed queue name</Trace>

<Trace level="1" type="T">Queue name : XBTI0000</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="3" type="T">Setup qRFC Scheduler</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>

<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>

<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>

<Trace level="3" type="T">OK.</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="3" type="T">Version number = 000</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="3" type="T">Persisting message Status = 001</Trace>

<Trace level="3" type="T">Message version 000</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">

<Trace level="3" type="T">Trace object available again now. OK.</Trace>

<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>

<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>

<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>

<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>

</Trace>

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>

<Trace level="2" type="T">Increment log sequence to 001</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="3" type="T">system-ID = NW2</Trace>

<Trace level="3" type="T">client = 100</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = XIAPPLUSER</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">

<Trace level="3" type="T">External PLID = CENTRAL</Trace>

<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>

</Trace>

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline attributes</Trace>

<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>

<Trace level="3" type="T">ENABLE = 1</Trace>

<Trace level="3" type="T">TRACELEVEL = 0</Trace>

<Trace level="3" type="T">EXEMODE = A</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline elements</Trace>

<Trace level="3" type="T">ELEMPOS = 0001</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0002</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0003</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0004</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0007</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0008</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0009</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T" />

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>

- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>

<Trace level="1" type="T">Cache Content is up to date</Trace>

<Trace level="2" type="T">Start without given receiver</Trace>

<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>

<Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>

<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>

<Trace level="2" type="T">Number of Receivers:1</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>

</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call</Trace>

<Trace level="3" type="T">Message-Version = 001</Trace>

<Trace level="3" type="T">Message version 001</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>

<Trace level="1" type="T">Cache Content is up to date</Trace>

<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>

<Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>

<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>

</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call</Trace>

<Trace level="3" type="T">Message-Version = 002</Trace>

<Trace level="3" type="T">Message version 002</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />

- <!-- ************************************

-->

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />

- <!-- ************************************

-->

<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="2" type="T">got property produced by receiver determination</Trace>

<Trace level="1" type="T">number of receivers: 1</Trace>

<Trace level="1" type="T">Single-receiver split case</Trace>

<Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Persisting single message for post-split handling</Trace>

<Trace level="1" type="T" />

<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="3" type="T">Persisting message Status = 012</Trace>

<Trace level="3" type="T">Message version 003</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">

<Trace level="3" type="T">Trace object available again now. OK.</Trace>

<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>

<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>

<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>

<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>

</Trace>

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>

<Trace level="2" type="T">Increment log sequence to 005</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="3" type="T">system-ID = NW2</Trace>

<Trace level="3" type="T">client = 100</Trace>

<Trace level="3" type="T">language = E</Trace>

<Trace level="3" type="T">user = XIAPPLUSER</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>

<Trace level="1" type="T">----

---

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">

<Trace level="3" type="T">External PLID = CENTRAL</Trace>

<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>

</Trace>

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline attributes</Trace>

<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>

<Trace level="3" type="T">ENABLE = 1</Trace>

<Trace level="3" type="T">TRACELEVEL = 0</Trace>

<Trace level="3" type="T">EXEMODE = A</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline elements</Trace>

<Trace level="3" type="T">ELEMPOS = 0001</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0002</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0003</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0004</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0007</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0008</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">ELEMPOS = 0009</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">FL_DUMMY =</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T" />

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>

<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>

- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">

<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">

<Trace level="2" type="T">......attachment XI_Context not found</Trace>

<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>

<Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>

<Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>

<Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>

<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>

<Trace level="3" type="T">Dynamic configuration is empty</Trace>

<Trace level="2" type="T">Mode 0</Trace>

<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>

<Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>

<Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>

<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>

<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>

<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>

<Trace level="3" type="T">Dynamic configuration is empty</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>

</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call</Trace>

<Trace level="3" type="T">Message-Version = 005</Trace>

<Trace level="3" type="T">Message version 005</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">

<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>

<Trace level="3" type="T">PLSRVTYPE =</Trace>

<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>

<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">

<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>

<Trace level="2" type="T">Cache Content is up to date</Trace>

<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>

<Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>

<Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>

<Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>

<Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>

<Trace level="2" type="T">no header mapping defined</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>

</Trace>

- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">

<Trace level="3" type="T">Persisting message after plsrv call</Trace>

<Trace level="3" type="T">Message-Version = 006</Trace>

<Trace level="3" type="T">Message version 006</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</Trace>

- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">

<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />

- <!-- ************************************

-->

<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>

<Trace level="3" type="T">ADRESSMOD = SD</Trace>

<Trace level="3" type="T">P_CLASS =</Trace>

<Trace level="3" type="T">P_IFNAME =</Trace>

<Trace level="3" type="T">P_METHOD =</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Unknown channel type: File</Trace>

<Trace level="3" type="T" />

<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>

<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>

<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>

<Trace level="3" type="T">ADRESSMOD = SD</Trace>

<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>

<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>

<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>

<Trace level="3" type="T">FL_LOG =</Trace>

<Trace level="3" type="T">FL_DUMMY = 0</Trace>

<Trace level="3" type="T" />

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">

<Trace level="3" type="T">Channel for adapter engine: File</Trace>

- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">

<Trace level="2" type="T">return fresh values from cache</Trace>

<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>

<Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>;

<Trace level="3" type="T">User = XIISUSER</Trace>

<Trace level="3" type="T">Cached = X</Trace>

<Trace level="3" type="T">Creating HTTP-client</Trace>

<Trace level="3" type="T">HTTP-client: creation finished</Trace>

<Trace level="3" type="T">Security: Basic authentication</Trace>

<Trace level="3" type="T">Serializing message object...</Trace>

<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>

<Trace level="3" type="T">HTTP-client: request sent</Trace>

<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>

<Trace level="3" type="T">HTTP-client: response received</Trace>

<Trace level="3" type="T">HTTP-client: checking status code...</Trace>

<Trace level="3" type="T">HTTP-client: status code = 200</Trace>

<Trace level="3" type="T">Deserializing message object...</Trace>

<Trace level="3" type="T">HTTP-client: closing...</Trace>

</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="3" type="T">Persisting message after plsrv call</Trace>

<Trace level="3" type="T">Message-Version = 007</Trace>

<Trace level="3" type="T">Message version 007</Trace>

<Trace level="3" type="T">Pipeline CENTRAL</Trace>

</SAP:Trace>

Thanks,

Jothivel.

[Former Member]

Hi,

I guess i was not clear enough when i said trace. Sorry!

What I meant was, in your RWB, in component monitoring -> adapter monitoring.

Double click on file adapter.

Look for your receiver communication channel in the list displayed.

Is it green? What is the text next to the communication channel say?

Regards,

Smitha.

[Former Member]

Hi Ajay,

If there is no error in SXMB_MONI then the problem is in the AF.

Are you doing content conversion?. Please can you just create a simple file adapter to dump the xml thats coming. If this works fine then issue might be in your content conversion.

Regards

Vijaya

[Former Member]

Hi All,

Thanks for all your reply. But I've already checked all that. All are fine. But still the file is not getting generated..

Thanks,

Ajay.

Message was edited by: Ajay Kumar V

[Former Member]

Hi,

Could you please put the trace of the receiver communication channel here?

Regards,

Smitha.

[Former Member]

Hi,

Go to run time workbench, and check your file adapter status. Double click on the file adapter.Check the trace that would be provided next to your communication channel.

What does it say?

Regards,

Smitha.

[Former Member]

Hi Ajay ,

In RWB check the File adpter status , check whether its green , also check the parametes entered in file adapter.

Regards,

Keith

[Former Member]

Hi,

may be the status of ur file adapter <b>INACTIVE</b> which will not be reflected in ur SXMB_MONI.just check in ur file adapter communication channel whether ur file adapter status is active or goto RWB and see whether communication channel status is active.

regards

jithesh