on 04-04-2006 11:05 AM
Dear XI expert
"Demo Examples Configuration guide"
6.2 Booking a Single Flight (Proxy-to-Idoc Communication)
Defining the Ports in the IDoc Adapter
http://static.flickr.com/1/123126333_8a728a87db_o.jpg
I got this error(?) message.
<b>I::000</b>
http://static.flickr.com/40/123126334_f53112c874_o.jpg
I can't find the reason.
Well, i'm not sure whether i'm right or not.
i tested WE60.
I found
http://static.flickr.com/38/123126335_1ac88080ab_o.jpg
.
I mean when i clicked [F8] - HTML Format.
Two basic types that haven't been checked as "released" show the following error message.
<b>FLIGHTBOOKING_CREATEANDRESP0,
FLIGHTBOOKING_SENDRESPONSE01</b>
-
Segment E1BPSBOSRE is unknown in Release 640/
Message no. EA312
Diagnosis
The system tried to read the IDoc segment 'E1BPSBOSRE' for Basis release '640' and application release ''.
System response
The segment 'E1BPSBOSRE' is not recognized in Basis release '640' with application release ''.
Procedure
Check the release entered. The segment is recognized in the system.
-
I also looked at
Idoc meta data does not come up in trx idx2
Unable to Import IDOCs
Importing Metadate from IDES 4.7 into Integration Server Rep
However, i haven't solved it yet.
Thanks in advance.
Regards,
David
P.S. I found almost same situation with me.
IDoc meta data load problem in IDX2
Error when Loading Metadata for IDOC Adapter
Kurt, THANKS for all the help. <b>I was finally able to load the idoc, I went it and check the user I generated with the appropiate privileges for ABC_107 and the role and profile were in red, I ran the comparison check, reset the password one more time and it worked.</b>
I then was able to load the idoc with trans idx2, it gave me a segment version warning but at least I was able to finish the configuration for the Check Availability Seat Scenario. I am now running into other issues... (neverending story!) but I will post it in a different topic.. thanks again
Diego
===================Advertisement==========================
How do you search SDN?
What about [SDN Search Widget]?
=========================================================
Message was edited by: David Kang (.) SAP@Home
This is what i have done.
http://static.flickr.com/43/123136481_9cd4d9b111_o.jpg
(I don't understand why it happened ).
Also i got this error "segment versions could not be read."
http://static.flickr.com/37/123141838_21fa92556d_o.jpg
<b>Finally, i got the screen that i expected.</b>
http://static.flickr.com/1/123136480_82e5623a27_o.jpg
page 50, 51 "Defining the Ports in the IDoc Adapter".
it doesn't show "using [Remote Logon] from R/3 Connection on Integration Server - Client 900".
Anyone can explain for me?
Regards,
David
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
humm, unfortunately,
I got this error again when i execute "Book Single Flight".
Transaction SXMB_MONI on Integration Server.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<b> <SAP:P1>I::000</SAP:P1></b>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: I::000</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Aha, i thought your post written by me (David K.) haha
well, thanks.
my question is
which role or profile is given to the user on the integration server?
SAP_BC_MID_ALE_IDOC_ADMIN
SAP_BC_MID_ALE_IDOC_DEVELOPER
in my case, there are three clients 105, 107, 900 (integration server).
I think the problem occurred between 900 and 107.
( not enough privilage to the user on 900)..
What do you think ?
Thanks,
David K.
Hi David K.,
If the receiver system is an R/3, then a role called SAP_XI_IS_SERV_USER is available.
But this role doesn't work completely. You have to add another Function Group to the S_RFC auth object. The Function group is IDXN (well instead of add) I suggest to copy)
If you are not dealing with an R/3 system, create a new one in your system that looks like the one I mentioned above.
see you,
David R.
SAP_XI_IS_SERV_USER
and
S_RFC ,
B_ALE_RECV
http://static.flickr.com/39/123148957_1b38e33601_o.jpg
were given to the user on Client 900.
I'm doing "Demo Examples Configuration".
Thanks.
David K.
Hi,
Activate the authorization check in transaction ST01 on client 900 and do the IDX2 stuff from client 100 (or the one who is setup as integration server).
After that stop the trace in client 900 and check the results (button Analysis). You should find an auth object with an RC <> 0.
Add it to your ZSAP_XI_IS_SERV_USER and you're (hopefully) done.
good luck,
David R.
Pd: Don't forget to reward the points (I'm pretty confident that this time you'll succeed )
Hi, David R.
Absolutely , i gave you points.
well, unlucky~.
107, 900 ( this is integration Server client)
[ST01 on Client 107]
http://static.flickr.com/1/123530468_ff4de7d99f_o.jpg
[Doing IDX2 on Client 900]
http://static.flickr.com/35/123530469_5d8b067a6b_o.jpg
[Turn off the trace on Client 107]
http://static.flickr.com/38/123530470_1f80bffc9e_o.jpg
[Trace Analysis on Client 107]
http://static.flickr.com/38/123530471_46563f8c96_o.jpg
[the result on Client 107]
http://static.flickr.com/34/123530472_3e81126e0f_o.jpg
what's wrong with this? humm...
Regards,
David K.
So,
To make sure I'm on the same track
900 - Integration Server / 107 - Business system
Ok. Have you double check that the rfc destination is ok?
I mean, not only the button to test the connection but also the remote logon.
If it doesn't work, add the auth object B_ALE_RECV with the parameter EDI_MES = *
See you,
David R.
Dear David R.
This is the current users role in each client (107, 900-integration server)
http://static.flickr.com/52/123990423_5df55a605a_o.jpg
I think its a big mistake. Thank you for your notice.
To be concluded,
the <b>X user on Client 107</b> should have
<b>SAP_XI_IS_SERV_USER</b>
and
<b>a role <Own Role></b>
{ that included
<b>S_RFC</b> (Activity Execute, RFC object EDIN, object type Function Group) ,
<b>B_ALE_RECV</b> (Message type FLIGHTBOOKING_CREATEANDRESP)
}.
in my case XX_SAP_XI_RFC role.
http://static.flickr.com/39/123148957_1b38e33601_o.jpg
I will ask my System Admin.
and test it.
I will let you know the result.
Thanks again.
Regards,
david k.
User | Count |
---|---|
84 | |
24 | |
12 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.