on 03-06-2009 5:35 PM
Hello All,
I has an ECC 6.0 sytem and was applying SAPKH60012-SAPKH60013 together.
During the TEST-IMPORT i got the following error for both the support package
"R3TRMSAGME was repaired in this system".
I had ignored the error during TEST_IMPORT.
But now i am stuck with this in my IMPORT_PROPER phase.
Please suggest, I did not find any SAP Notes for this error.
Also the main error
Error in phase :IMPORT_PROPER
Reason of the ERROR:TP_STEP_FAILUER
Return Code: 0008
Error Message :OCS Package SAPKH60012 , tp step "I",return Code 0008
Also i found in the log this error
Start import LIMUDOCUNAME818
R3TRMSAGME was repaired in this system
LIMUDOCUNAME818
Regards
Anthony
Edited by: Anthony D'souza on Mar 6, 2009 11:11 PM
Hi,
For this error "R3TRMSAGME was repaired in this system". You need to reset the repair fag by using tcode se03.
Also this error "TP_STEP_FAILUER" says that tp failed. If you have upgraded kernel level before sp upgrade then check current tp's version. If you have not upgraed tp.exe then download latest tp.exe & put it in your kernel path & restart the sp upgrade.
Please check ksap note for known problem in Support packs for your SAP release
Also check below threads. It will help you
Thanks,
Sushil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi ,
Check tp showbuffer SLM pf=\usr\sap\trans\bin\TP_DOMAIN_SLM.PFL
Cheers
Deepanshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Anthony,
Read the prerequisite note for installing support packs.SAP Note 652671.Hope you get solved.
Regards,
Kalyan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear ,
Your Trans dir is properly shared....and run the command r3trans-d also check show buffer.
if all are proper.....
then tell
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You can reset the repair flag.
Go to SE03- Dispaly object repaired into the system - check the object R3TRMSAGME and reset the repair flag then continue you import.
Regards,
Subhash
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.