on 02-24-2009 10:02 AM
Dear all,
i am installing ECC 6.0 with win 2003 and orcale..
every thing is ok but when database is creating it is showing error in the step catprocu2026sqlu2026.
and get the log
ERROR 2009-02-24 13:32:48
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
ERROR 2009-02-24 13:32:48
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-02-24 13:32:48
FCO-00011 The step runCatprocSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR .
after getting this when i am trying at CMD level and typing SQLPLUS and logging as sysdba
then it is showing
ORA-12560:-TNS : protocol adapter error
provide me the solution how can i rectify...
Markus is right. I have missed that database is 10.2.0.1.0
It is not supported by SAP. You need to apply the patch first up to 10.2.0.2.0 or 10.2.0.4.0
Regards,
Subhash
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi to every one
facing that error when
ERROR 2009-02-24 13:32:48
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for detail
and then i check the ora_eql_results.log then i found
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
DOC>######################################################################
DOC>######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error and terminate the SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>###
> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
> With the Partitioning, OLAP and Data Mining options
> .<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for detail
Again - 10.2.0.1 is not supported - the error you get is due to a database error that is fixed with 10.2.0.2 (+ interim patches) or 10.2.0.4.
Markus
Dear Markus,
i follow... below steps...tell me these or ok or not and where i sholud have install patchset...
please describe ....or suggest
Go to the drive for orcale
\orcale\10G\NT\I386
now i have option
Database
Sap
but i choose Database
means
\orcale\10G\NT\I386\database\setup.exe
then got the screen
SELECT INSTALLATION METHOD
Basic installation installation or Advances installation
here i choose Advanced installation
SELECT INSTALLATION TYPE
EntrpriseEdition 10.2.0.1.0
SELECT CONFIGRATION OPTION
Install database software only
i got the message after all 8th step
END OF INSTALLATION
the installation of orcale database 10g was successful.
then i aply the patches
i choose the path
orcale10g\ORA Patch\NT\I386\setup.exe
i got orcale welcome window
Orcale Universal Installation 10.2
SPECIFY HOME DETAILautomatically take the path
D:\Orcale\Product\10.2.0\db_3
but after that give the same error
OUI-10091:There are no patches that need to be applied from the patchset orcale 10 g release to patch set 1 10.2.0.2.0
Thanks for reply Markus
wrong - you should use sapserver.cmd in the SAP subdirectory to install the database
as you suggest
now i am doing fresh installation i am choosing SAp subdirectory and then i am choosing sapserver.cmd
it is asking me type the drive where you want to install...
i simply type
[D:]:
then ask for <SID> i type MRP
but now it is showing same thing and opening patch window ....
same OUI message
what can i do....
if i run simply orcale exe then what's wrong...
please suggest..
Anuj
I repeat again:
the sapserver.cmd uses a predefined response file with configuration that need to be done for a SAP system. Of course it will show the same diaglos but with fewer questions.
Please: read the installation guide, it will tell you exaclty which paths you should install the database.
Markus
thanks for all
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I think your oracle tablespace is full or the disk is full.Pls check the alert_<SID>.log.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Oracle version is showing 10.2.0.1.0. Please upgrade the oracle patch set either on 10.2.0.2.0 or 10.2.0.4.0.
Regards,
Sachin Rane.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
> With the Partitioning, OLAP and Data Mining options
That version 10.2.0.1 is not supported. Read the installation guide, it tells you what to install to make this working...
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks to all of you for reply and suggestion....
i want to share some more information here ...after editing listener.ora file and copy that file and renamed it to LISTENER1.ora and change the post 1521 and also add in envaronment Variable LOCAL=<SID> ...
after that i am able to go in
SQLPLUS and sql
SQL>
NOT FACING ERROR RELATED TO TNS PROTOCOLE ADAPTER
but problem is that
whenever through CMD level i am checking
SQL> shutdown immediate
ORA-01034: ORCALE not available
ORA-27101:Shared Memory Realm
SQL>
SQL>startup
ORCALE instance started
Total gobale area shows buffer ..area
Database mounted
ORA-01092: Orcale Instance Terminated. Disconnection Forced.
i hope this is due to orcale patch level.
but for information i install orcale 10 g then i apply patches 10.2
but when i was apply patches...
it shows..
OUI-10091:There are no patches that need to be applied from the patchset orcale 10 g release to patch set 1 10.2.0.2.0
so what that mean...
should i apply any thing ....
please tell me.....
Regards
Anuj
Anuj,
Please refer to the link below. Also post log files from ..\NETWORK\log and your ORACLE_HOME environment variable.
http://www.dbmotive.com/oracle_error_codes.php?errcode=27101
Are you sure you have 10.2.0.2.0 version because earlier it was showing different?
Hope this helps.
Manoj
Is it so hard to read your error message:
SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Have you tried to search the same in SDN.
Its a common error your TNS listner is not configured properly. Please have a search
Regards,
Subhash
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
> Its a common error your TNS listner is not configured properly. Please have a search
I don't believe it's related to TNS, if Oracle does a "forced disconnection" is most likely a database error (followed by an ORA-00600).
The most common case for this is that people install just the version on the DVD and don't add patch 10.2.0.2 plus interim or 10.2.0.4....
Markus
User | Count |
---|---|
83 | |
10 | |
10 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.