Material not posted in quality and no inspection lot has been created

[former_member1244710]

Dear All,

We are trying to carry out the sales return scenario . we have activated the inspection types 06 and 12 to the material how ever when we do the PGR for the returns order the returns is carried out and the stock goes in unrestricted and not in quality .

Please advice how to resolve this issue

[former_member1244710]

we have resolved this query

[Former Member]

Hi ,

As Babu mentioned,with 06 inspection type you wont have stock posting tab.

But if you want to have 06 inspection lot check the return delivery movt type ,it should be 651(returns from customer) then you will get the inspection lot origin 06 & the material gets posted in the returns from the customers.

After doing quality check against 06 inspection lot you can withdraw material from returns from customer to unrestricted using movt type 453 & if you want inspection lot at this point too you can activate 05 inspection type which will create the stock relevant inspection lot.

Cheers,

Tushar

[Former Member]

Hi Ram,

Follow the below Customer Return procedure.

Case1.

The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.

1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.

2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.

3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked

Case2.

Inspectoin type 05 is a stock relevant inspection type.

To use 05 you must assign the 05 inspection type to the delivery item in configuration.

follow this path.

tcode vov6 - there will be schedule line category DN.

go to details of DN.In Business data,check which movement type is assigned here.

I think in your case it will be 653.

change it to 655 and try now.

hope it will work.

revert further clarification

Regards,

S.Babusingh