OSS1 and RFC SAP-OSS IP address to SAP

[Former Member]

Hi Gurus,

I have steup connection using OSS1 and SAP-OSS, and I have gor the same error:

[Thr 2904] * LOCATION SAProuter 38.10 on 'mpi-server'

[Thr 2904] * ERROR connection to 147.204.2.5:sapdp99 timed out

[Thr 2904] *

• TIME Mon Feb 09 17:11:50 2009

[Thr 2904] * RELEASE 700

[Thr 2904] * COMPONENT NI (network interface)

[Thr 2904] * VERSION 38

[Thr 2904] * RC -5

[Thr 2904] * MODULE nirout.cpp

[Thr 2904] * LINE 5441

[Thr 2904] * DETAIL RTPENDLIST::timeoutPend: ROUTED timeout

[Thr 2904] * COUNTER 3

I have setup sapdp99 as 3200/tcp

started saprouter with saprouttab and allowed the route

checked with lgtst

is there any other posibillirties to check the connection to SAP waldorf through my network?

Thanks

Martial

[Former Member]

Shouldn't sapdp99 be set to 3299/tcp?

[Former Member]

Hi Ragu,

it has been set to 3299/TCP.

I have checked the log of my network router and the packets passed thru.

I checked with tracret and it is timed out as well.

Best regards

Martial

[markus_doehr2]

The problem is not related to saprouter but it seems you have a network issue.

sapserv3 is not publicly available over the internet, only sapserv2 is reachable through SNC directly.

Did you open an OSS call (XX-SER-NET) and told SAP your saprouter?

Can you "telnet 147.204.2.5 3299" - does that connect from your saprouter?

Markus

[Former Member]

Hi,

telnet with sapserv3 does not work but it works with sapserv2.

So far when I tried to Logon with OSS1 using sapserv2 I have got permission denied.

Where I have to setup the authorization?

best regard

Martial

**************************************************************

-

---

trc file: "dev_rout", trc level: 1, release: "700"

-

---

Tue Feb 10 14:53:41 2009

SAP Network Interface Router, Version 38.10

command line arg 0: saprouter

command line arg 1: -r

command line arg 2: -G

command line arg 3: saprouter.log

main: pid = 6424, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)

reading routtab: './saprouttab'

Tue Feb 10 14:54:35 2009

NiHsLGetHostName: to get 192.168.0.47 succeeded in 4490ms (tl=2000ms; UC)

HN='MPI-SERVER'; Add[0]=192.168.0.47

Tue Feb 10 14:55:35 2009

• ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2125]

Tue Feb 10 14:56:14 2009

• ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2125]

Tue Feb 10 14:56:20 2009

• ERROR => NiBufIProcMsg: hdl 2 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2125]

Edited by: Martial Pagniez on Feb 10, 2009 4:38 PM

[raguraman_c]

Hi,

Post the content of dev_rout file.

feel free to revert back.

-=-Ragu

[Former Member]

here the dev_rout file:

-

---

trc file: "dev_rout", trc level: 1, release: "700"

-

---

Tue Feb 10 07:56:10 2009

SAP Network Interface Router, Version 38.10

command line arg 0: saprouter

command line arg 1: -r

command line arg 2: -G

command line arg 3: saprouter.log

main: pid = 6412, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)

reading routtab: './saprouttab'

Tue Feb 10 07:56:22 2009

NiHsLGetHostName: to get 192.168.0.254 failed in 4556ms (tl=2000ms; UC)

best regards

Martial

[Former Member]

Hi ragu,

I changed the SAP customer IP by the IP of my network router but still timed out:

IP 192.168.0.254 is the IP of the gateway of my network router

IP 192.168.0.47 is the IP of my network router

*****************************************************************************

-

---

trc file: "dev_rout", trc level: 1, release: "700"

-

---

Tue Feb 10 07:56:10 2009

SAP Network Interface Router, Version 38.10

command line arg 0: saprouter

command line arg 1: -r

command line arg 2: -G

command line arg 3: saprouter.log

main: pid = 6412, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)

reading routtab: './saprouttab'

Tue Feb 10 07:56:22 2009

NiHsLGetHostName: to get 192.168.0.254 failed in 4556ms (tl=2000ms; UC)

Tue Feb 10 08:05:05 2009

NiHsLGetHostName: to get 192.168.0.47 succeeded in 4552ms (tl=2000ms; UC)

HN='MPI-SERVER'; Add[0]=192.168.0.47