on 02-01-2009 1:04 PM
Dear Sir,
Please help me to create Xbar and R chart in SAP
Thank you
in advance
M Chakraborty
Helo
I dont think we can create X bar chart. there is only X bar S chart (deviation) . mentioned below is the process for spc charts
Control charts
Please follow the steps
1) Create MIC (QS21) with control indicator SPC sampling and Single recording
2) Create Sampling procedure ( QDV1) selection valuation mode as SPC valuation
3) Select any of the Bar charts
4) Assign the MIC and the sampling procedure in QP01
5) Create and do result recording
6) Make sure that you have single recording and you RR for 5 to 10 lots
7) Now got to QGC1
8) Put all the relevant fields
9) Maintain in the status of control chart as 1
10) Execute
11) Select the MIC and click on activate control chart
12) Click on call control chart
13) Next time you run the chart use the status of control chart as 3
2) for getting multiple sample values make sure that you selection single recording in MIC
3) Control charts will not show Cp, CPK directly in the graph
4) control charts are SPC tools for understanding the stability of process and to check whether the process are running within the specified limits
5) You can get CP, CPk in information system MCXD also
5) Also there is another option for getting cp cpk please follow the steps below
Regards
Gajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
108 | |
12 | |
11 | |
6 | |
5 | |
4 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.