on 03-14-2006 12:21 AM
Hi
I installed SAP MINI 4.6D but I got error message when I logon by sapgui as below.
work process w0 died
Here I attached dev_ms and dev_disp and dev_w0, please let me have a solution. Thanks
>>>>>>>>>>>>>>dev_ms>>>>>>>>>>>>>>>>>>
-
trc file: "dev_ms", trc level: 1, release: "46D"
-
Thu Mar 09 13:50:22 2006
relno 4640
patchlevel 0
patchno 194
intno 0
pid 1412
***LOG Q01=> MsSInit, MSStart (Msg Server 1 1412) [msxxserv 1212]
I listen to port sapmsRDV (3600) ***
CUSTOMER KEY: >S1373664713<
Thu Mar 09 13:50:23 2006
ERROR => MsSClientHandle: no server provides service ENQ (4), requested from kserver_RDV_00 [msxxserv 3220]
Thu Mar 09 13:59:01 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1123]
ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv 7101]
ERROR => MsSClientHandle: MsSRead C0 (kserver_RDV_00), MSEINTERN [msxxserv 2905]
Thu Mar 09 13:59:30 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1123]
ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv 7101]
ERROR => MsSClientHandle: MsSRead C0 (kserver_RDV_00), MSEINTERN [msxxserv 2905]
>>>>>>>>>>>>>>dev_disp>>>>>>>>>>>>>>>>>>
-
trc file: "dev_disp", trc level: 1, release: "46D"
-
Thu Mar 09 13:50:23 2006
relno 4640
patchlevel 0
patchno 242
intno 0
pid 372
***LOG Q00=> DpSapEnvInit, DPStart (00 372) [dpxxdisp 0863]
MtxInit: -2 0 0
MBUF state OFF
MBUF opmode USE
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 64 MB
<ES> 63 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( kserver) [dpxxdisp 7271]
MBUF set hwid_state to HWID_PENDING
CCMS: Initalizing shared memory of size 10000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 4640, patchlevel 0
MBUF state PREPARED
MBUF component UP
MBUF set hwid_state to SAP_O_K (S1373664713 )
DpMsgAdmin: Set patchno for this platform to 242
Release check o.K.
Thu Mar 09 13:50:34 2006
MBUF state ACTIVE
Thu Mar 09 13:51:03 2006
ERROR => W0 (pid 484) died [dpxxdisp 9388]
Thu Mar 09 13:59:01 2006
***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1123]
ERROR => MsIReadFromHdl: NiRead (rc=-6) [msxxi.c 1434]
ERROR => NiBufCheckErr: Buffer 3 in stat err without errinfo [nibuf.c 1018]
ERROR => MsINiWrite: NiBufSend (rc=-1) [msxxi.c 2025]
ERROR => MsIDetach: MsINiWrite (rc=-100) [msxxi.c 0957]
MBUF state OFF
MBUF component DOWN
ERROR => DpMsgProcess: MsReceive (-100) [dpxxdisp 1700]
ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp 1766]
Thu Mar 09 13:59:02 2006
ERROR => MsISnd2: not_attached [msxxi.c 1126]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp 3031]
Thu Mar 09 13:59:20 2006
***LOG Q0K=> DpMsAttach, mscon ( kserver) [dpxxdisp 7271]
MBUF set hwid_state to HWID_PENDING
Release check o.K.
MBUF state PREPARED
MBUF component UP
MBUF set hwid_state to SAP_O_K (S1373664713 )
MBUF state ACTIVE
>>>>>>>>>>>>>>>dev_w0>>>>>>>>>>>>>>>>
-
trc file: "dev_w0", trc level: 1, release: "46D"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
*
B
B Thu Mar 09 13:50:23 2006
B create_con (con_name=R/3)
B Loading DB library '.\dbmssslib.dll' ...
B Library '.\dbmssslib.dll' loaded
B Version of '.\dbmssslib.dll' is '46D.00'
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 242
M intno 0
M pid 484
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 484) [dpxxdisp 0895]
I MtxInit: -2 0 0
X
X Thu Mar 09 13:50:24 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T0
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Extended Fetch will be used
C Initializing shared procedure name cache (KSERVER_RDV_MEM,132040 bytes,1000 procs)
C procedure cache created/attached
C Initializing shared TEMP procedure cache (KSERVER_RDV_TSP,70424 bytes,100 procs)
C TEMP procedure cache created/attached
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\RDV\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 228
C patchcomment FAE and REPARSE-hint (338468)
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20060309 135023
M db_connect o.k.
I MtxInit: 0 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B ***LOG BB0=> buffer TABL started with length 2000000 bytes [dbtbxbuf 1636]
B ***LOG BB0=> buffer TABLP started with length 000512000 bytes [dbbfe 0964]
B Layout of object buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 256 = 256
B 2: 2 * 20 = 40
B 3: 401 * 40 = 16040
B 4: 200 * 128 = 25600
B 5: 401 * 4 = 1604
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 16041 * 128 = 2053248
B ***LOG BB0=> buffer EIBUF started with length 2048k bytes [dbexpbuf 1870]
B Layout of object buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 256 = 256
B 2: 2 * 20 = 40
B 3: 503 * 40 = 20120
B 4: 250 * 128 = 32000
B 5: 503 * 4 = 2012
B 6: 1 * 100 = 100
B 7: 193 * 4 = 772
B 8: 1783 * 256 = 456448
B ***LOG BB0=> buffer CUA started with length 500k bytes [dbexpbuf 1870]
B
B Thu Mar 09 13:50:25 2006
B db_con_shm_ini: WP_ID = 0, WP_CNT = 2
B ***LOG BB0=> buffer CALE started with length 300000 bytes [dbcalbuf 2166]
C The IRow interface is supported by this OLEDB provider
B
B Thu Mar 09 13:50:26 2006
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Mar 09 13:50:27 2006
M SsfSapSecin: automatic application server initialization for SAPSECULIB
M SsfSapSecin: Looking for PSE in database
M SsfPseLoad: started...(path=.\sec, AS=kserver, instanceid=00)
M SsfPseLoad: Downloading file .\sec\SAPSYS.pse (client: , key: SYSPSE, len: 1575)
M
M Thu Mar 09 13:50:28 2006
M SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
M rdisp/reinitialize_code_page -> 0
M CCMS: Warning: could not open file [DIR_LOGGING]/ALMTTREE
S
S Thu Mar 09 13:50:31 2006
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 04AABFC0
S spool kernel/ddic check: Ok
S 0 spool work process(es) found
S frontend print server enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S
S Thu Mar 09 13:50:32 2006
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 056E0098
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 056E0140
S using messages for server info
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 057A0040, size 51333K)
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC Destination> destination kserver_RDV_00 host kserver system RDV systnr 0 (kserver_RDV_00)
A RFC Options> H=kserver,S=00
B
B Thu Mar 09 13:50:33 2006
B table logging switched off for all clients
A RFC Method> initialize RemObjDriver for ABAP Objects
M Checking MiniSystem
M MiniSystem successfully set
M SsfSapSecin: putenv(SECUDIR=.\sec): ok
M SsfSapSecin: PSE .\sec\SAPSYS.pse found!
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is .\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M *** ERROR => DlLoadLib: LoadLibrary .\sapsecu.dll, Error: 126 [dlnt.c 0180]
M *** ERROR =>
===...could not load SSF library .\sapsecu.dll .
[ssfxxkrn 0410]
M ===...completed with return code 10.
M =================================================
M
M Thu Mar 09 13:50:34 2006
M *** ERROR => OS release Windows NT 5.2 3790 Intel 80686 (Mod 9 Step 5) is not supported with this kernel (46D) [thxxsick 0288]
A *** ERROR => OS release Windows NT 5.2 3790 Intel 80686 (Mod 9 Step 5) is not supported with this kernel (46D) [sapicc.c 0729]
M
M Thu Mar 09 13:50:35 2006
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9932]
A
A Thu Mar 09 13:50:38 2006
A Thu Mar 09 13:50:38 2006
A ABAP/4 Program ????????????????????????????????????????.
A Source Line 0.
A Error Code START_CALL_SICK.
A Module $Id: //bas/46D/src/krn/runt/abdynpro.c#3 $ SAP.
A Function ab_dialg Line 98.
A
A Thu Mar 09 13:50:39 2006
A Database inconsistency: Start Transaction SICK..
A
M
M Thu Mar 09 13:50:44 2006
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9932]
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool 0380]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
-
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.exe (pid=484)
When : 3/9/2006 13:50:45.202
Threads : 2
-
Comuter Name : KSERVER
User Name : Administrator
-
Number of Processors: 1
Processor Type: x86 Family 6 Model 9 Stepping 5
Windows Version: 5.2 Current Build: 3790
-
State Dump for Thread Id 8a8
eax=7feae7a0 ebx=00000002 ecx=7feae7a0 edx=00000000 esi=00000430 edi=00000000
eip=7ffe0304 esp=01b6e950 ebp=01b6e9c0 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : dypex00
004c6f6a 6a3c push 0x3c
004c6f6c 6a31 push 0x31
004c6f6e e840381400 call ab_trput (0060a7b3)
004c6f73 83c434 add esp,0x34
004c6f76 6a04 push 0x4
004c6f78 6840fc6501 push 0x165fc40
004c6f7d ff15e844c100 ds:00c144e8=77b65db8
call dword ptr [_imp__longjmp (00c144e8)]
004c6f83 8b0d7c9a2d01 mov ecx,[spaptr (012d9a7c)] ds:012d9a7c=7feae7a0
004c6f89 f6813007000008 test byte ptr [ecx+0x730],0x8 ds:7feaeed0=00
004c6f90 757e jnz dypex00+0x19d (004c7010)
FAULT-> 004c6f92 849e97070000 test [esi+0x797],bl ds:00000bc7=??
004c6f98 7576 jnz dypex00+0x19d (004c7010)
004c6f9a 8a812c070000 mov al,[ecx+0x72c] ds:7feaeecc=00
004c6fa0 81c12c070000 add ecx,0x72c
004c6fa6 a820 test al,0x20
004c6fa8 7466 jz dypex00+0x19d (004c7010)
004c6faa 24df and al,0xdf
004c6fac 8801 mov [ecx],al ds:7feae7a0=03
004c6fae 391d48572d01 cmp [ct_level (012d5748)],ebx ds:012d5748=00000001
004c6fb4 7c1c jl dypex00+0x15f (004c6fd2)
004c6fb6 e83c885400 call rstrc11_clr_cflush (00a0f7f7)
004c6fbb 68f0a8c800 push 0xc8a8f0
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
01b6f008 006432f8 00000004 00cf7dac 00000002 00000000 disp+work!dypex00
01b6f464 00641d71 00cfe428 01b6f4a0 00000041 00000000 disp+work!ab_alert
01b6f51c 006672aa 00cfe438 00cfe428 00000062 00cfe33c disp+work!ab_rabax
01b6f53c 004c3cc7 00000000 00000000 00000000 01b6fe8c disp+work!ab_dialg
01b6f554 004c55d1 00000001 00000001 00000002 00000000 disp+work!dy_isession
01b6f56c 004e0049 004f0044 00530057 0053005c 00730079 disp+work!dynpen00
01b6f5f8 77f28418 77f28464 00000001 00000000 00000000 disp+work!dySetLogicalCursor
01b6f670 77f29aed 77f29af4 00000000 000692a0 00000000 ntdll!RtlImageNtHeaderEx
00000000 00000000 00000000 00000000 00000000 00000000 ntdll!LdrUnlockLoaderLock
-
State Dump for Thread Id 758
eax=02141000 ebx=00000103 ecx=02a3fa34 edx=00000000 esi=00000000 edi=00000000
eip=7ffe0304 esp=02a3fc74 ebp=02a3fcb8 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function : <nosymbols>
7ffe02f0 0000 add [eax],al ds:02141000=00
7ffe02f2 0000 add [eax],al ds:02141000=00
7ffe02f4 0000 add [eax],al ds:02141000=00
7ffe02f6 0000 add [eax],al ds:02141000=00
7ffe02f8 0000 add [eax],al ds:02141000=00
7ffe02fa 0000 add [eax],al ds:02141000=00
7ffe02fc 0000 add [eax],al ds:02141000=00
7ffe02fe 0000 add [eax],al ds:02141000=00
7ffe0300 8bd4 mov edx,esp
7ffe0302 0f34 ???
7ffe0304 c3 ret
7ffe0305 9c pushfd
7ffe0306 810c2400010000 or dword ptr [esp],0x100 ss:02a3fc74=77f22845
7ffe030d 9d popfd
7ffe030e c3 ret
7ffe030f 90 nop
7ffe0310 90 nop
7ffe0311 90 nop
7ffe0312 90 nop
7ffe0313 90 nop
7ffe0314 8bd4 mov edx,esp
7ffe0316 0f05 loadall
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
02a3fc70 77f22845 77e00226 000005f0 00000000 00000000 <nosymbols>
02a3fcb8 00b939c2 000005f0 00000000 00000000 02140c90 ntdll!NtFsControlFile
02a3ff84 77b691ed 00000000 00000000 00000000 00275fd8 disp+work!SigILastSig
02a3ffb8 77dea990 00275fd8 00000000 00000000 00275fd8 MSVCRT!endthreadex
02a3ffec 00000000 00000000 00000000 00000000 00000000 kernel32!FlsSetValue
-
M -
M
M Thu Mar 09 13:50:45 2006
M call clean-up function ...
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M Modeinfo for User T2/M0
M tm state = 2
M uid = 3
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = > <
M terminal = >kserver <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 0
M mode state = 0x12
M th_errno = 11
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 62040378
M Adresse Offset Data from input buffer
M -
M 02F17D70 000000 00000000 00000000 10040200 0c000187 |................|
M 02F17D80 000016 68000004 4c00000b b810040b 0020ff7f |h...L........ ..|
M 02F17D90 000032 fa0d68b7 37daf619 6e9320bf 00000000 |..h.7...n. .....|
M 02F17DA0 000048 00000000 00000000 00000000 0000 |.............. |
M -
M
M *****************************************************************************
M *
M * LOCATION SAP-Server kserver_RDV_00 on host kserver (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Thu Mar 09 13:50:45 2006
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 7686
M * COUNTER 1
M *
M *****************************************************************************
M
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9932]
M ***LOG R68=> ThIRollBack, roll back () [thxxhead 9932]
A
A ** RABAX: level LEV_RX_STANDARD failed.
A
A Thu Mar 09 13:50:46 2006
A
A ** RABAX: level LEV_SN_DYNPRO failed.
A
A ** RABAX: level LEV_SN_WALIST failed.
B Disconnecting from ALL connections:
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE YES YES NO 20060309 135023
B Disconnected from connection 0
B statistics db_con_commit (com_total=9, com_forced=2, com_tx=2)
B statistics db_con_rollback (roll_total=4, roll_forced=1, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 484) [dpnttool 0300]
M return from clean-up function ...
-
trc file: "dev_w0", trc level: 1, release: "46D"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
*
B
B Thu Mar 09 13:51:04 2006
B create_con (con_name=R/3)
B Loading DB library '.\dbmssslib.dll' ...
B Library '.\dbmssslib.dll' loaded
B Version of '.\dbmssslib.dll' is '46D.00'
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 242
M intno 0
M pid 624
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 624) [dpxxdisp 0895]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Extended Fetch will be used
C Using shared procedure name cache (KSERVER_RDV_MEM,132040 bytes,1000 procs) initialized by another process
C Using shared TEMP procedure cache (KSERVER_RDV_TSP,70424 bytes,100 procs) initialized by another process
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\RDV\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 228
C patchcomment FAE and REPARSE-hint (338468)
B Connection 0 opened
B Wp Hdl ConName ConCnt ConState TX PRM RCT Date Time
B 000 000 R/3 000000 ACTIVE NO YES NO 20060309 135104
M db_connect o.k.
I MtxInit: 0 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 2
M rdisp/reinitialize_code_page -> 0
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 021A1160
S spool kernel/ddic check: Ok
S 0 spool work process(es) found
S frontend print server enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 055A0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 055A0140
S using messages for server info
A
A -PXA--
A PXA INITIALIZATION
A Attached to PXA (address 05660040, size 51333K)
A PXA INITIALIZATION FINISHED
A -PXA--
A
A RFC Destination> destination kserver_RDV_00 host kserver system RDV systnr 0 (kserver_RDV_00)
A RFC Options> H=kserver,S=00
C The IRow interface is supported by this OLEDB provider
A RFC Method> initialize RemObjDriver for ABAP Objects
M Checking MiniSystem
M MiniSystem successfully set
M SsfSapSecin: putenv(SECUDIR=.\sec): ok
M
M =================================================
M === SSF INITIALIZATION:
M ===...SSF Security Toolkit name SAPSECULIB .
M ===...SSF trace level is 0 .
M ===...SSF library is .\sapsecu.dll .
M ===...SSF hash algorithm is SHA1 .
M ===...SSF symmetric encryption algorithm is DES-CBC .
M *** ERROR => DlLoadLib: LoadLibrary .\sapsecu.dll, Error: 126 [dlnt.c 0180]
M *** ERROR =>
===...could not load SSF library .\sapsecu.dll .
[ssfxxkrn 0410]
M ===...completed with return code 10.
M =================================================
M ThCheckPrevUser: clean previous user T2/U3/M0
M Modeinfo for User T2/M0
M tm state = 2
M uid = 3
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = > <
M terminal = >kserver <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 0
M mode state = 0x12
M th_errno = 11
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 2
M abap state = 2
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = -1
M mode type = 0x1
M debug = 0
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 62040378
M ThResetMemStates: reset initialized roll mem state
M ThResetMemStates: reset initialized abap mem state
M
M Thu Mar 09 13:59:01 2006
M MBUF info for hooks: MS component DOWN
M ***LOG R0Z=> ThResetVBDisp, reset update dispatching info () [thxxvb.c 6866]
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:46D.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * = 0x0,
B use_hints = abap->1, dbif->1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Mar 09 13:59:02 2006
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead 13118]
M *** ERROR => ThMsOpcode: ThOpcodeToMsg failed (1) [thxxmsg. 2553]
M ThVBHdlMsgDown: msg down
M ThIVBChangeState: update deactivated
M ***LOG R0R=> ThIVBChangeState, update deactivated () [thxxvb.c 9703]
M
M Thu Mar 09 13:59:20 2006
M MBUF info for hooks: MS component UP
M ThISetEnqname: enq name = >kserver_RDV_00 <
M ThVBHdlMsgUp: msg up
M ThIVBChangeState: update activated
M ***LOG R0T=> ThIVBChangeState, update activated () [thxxvb.c 9689]
Hi,
<i>===...could not load SSF library .\sapsecu.dll</i>
Kindly check Note 354819 for the SSF, also set the
parameter as per Note 177895.
<i>*** ERROR => OS release Windows NT 5.2 3790 Intel
80686 (Mod 9 Step 5) is not supported with this kernel (46D) [thxxsick 0288]</i>
Kindly check the compatibility of the Kernel version to
the OS version being used.
Regards
Srikishan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.