"ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED"

[Former Member]

Hi all,

In SMICM all the services are showing active, when I tried to run the webservices the following is the error that I am getting, have looked at different solutions on sdn.

Also please find below the dev_icm file.

<?xml version="1.0" encoding="utf-8" ?>

- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">

- <asx:values>

<SYSTEMFAULT href="#o112" />

</asx:values>

- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">

- <cls:CX_AI_SYSTEM_FAULT id="o112">

- <CX_ROOT>

<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>

<PREVIOUS />

<KERNEL_ERRID />

- <INTERNAL_SOURCE_POS>

<PROGID>185</PROGID>

<CONTID>978</CONTID>

</INTERNAL_SOURCE_POS>

</CX_ROOT>

<CX_STATIC_CHECK />

- <CX_AI_SYSTEM_FAULT>

<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>

<CODE>SOAP:1.023</CODE>

<ERRORTEXT>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</ERRORTEXT>

<LANGUAGE />

</CX_AI_SYSTEM_FAULT>

</cls:CX_AI_SYSTEM_FAULT>

</asx:heap>

</asx:abap>

dev_icm:

trc file: "dev_icm", trc level: 1, release: "640"

sysno 00

sid CC5

systemid 560 (PC with Windows NT)

relno 6400

patchlevel 0

patchno 139

intno 20020600

make: multithreaded, Unicode

pid 5848

[Thr 5852] Thu Jan 15 23:09:17 2009

[Thr 5852] ICM running on: dlwsdv11

[Thr 5852] MtxInit: -2 0 0

[Thr 5852] IcmInit: listening to admin port: 65000

[Thr 5852] DpSysAdmExtCreate: ABAP is active

[Thr 5852] DpShMCreate: sizeof(wp_adm)##10528#(1316)

[Thr 5852] DpShMCreate: sizeof(tm_adm)##2969176#(14772)

[Thr 5852] DpShMCreate: sizeof(wp_ca_adm)##24000#(80)

[Thr 5852] DpShMCreate: sizeof(appc_ca_adm)#8000#(80)

[Thr 5852] DpShMCreate: sizeof(comm_adm)##290000#(580)

[Thr 5852] DpShMCreate: sizeof(vmc_adm)##0#(424)

[Thr 5852] DpShMCreate: sizeof(wall_adm)##(38456/34360/64/184)

[Thr 5852] DpShMCreate: SHM_DP_ADM_KEY##(addr: 032C0040, size: 3381680)

[Thr 5852] DpShMCreate: allocated sys_adm at 032C0040

[Thr 5852] DpShMCreate: allocated wp_adm at 032C1B88

[Thr 5852] DpShMCreate: allocated tm_adm_list at 032C44A8

[Thr 5852] DpShMCreate: allocated tm_adm at 032C44D0

[Thr 5852] DpShMCreate: allocated wp_ca_adm at 03599328

[Thr 5852] DpShMCreate: allocated appc_ca_adm at 0359F0E8

[Thr 5852] DpShMCreate: allocated comm_adm_list at 035A1028

[Thr 5852] DpShMCreate: allocated comm_adm at 035A1040

[Thr 5852] DpShMCreate: allocated vmc_adm_list at 035E7D10

[Thr 5852] DpShMCreate: system runs without vmc_adm

[Thr 5852] DpShMCreate: allocated ca_info at 035E7D38

[Thr 5852] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

[Thr 5852] IcmCreateWorkerThreads: created worker thread 0

[Thr 5852] IcmCreateWorkerThreads: created worker thread 1

[Thr 5852] IcmCreateWorkerThreads: created worker thread 2

[Thr 5852] IcmCreateWorkerThreads: created worker thread 3

[Thr 5852] IcmCreateWorkerThreads: created worker thread 4

[Thr 5852] IcmCreateWorkerThreads: created worker thread 5

[Thr 5852] IcmCreateWorkerThreads: created worker thread 6

[Thr 5852] IcmCreateWorkerThreads: created worker thread 7

[Thr 5852] IcmCreateWorkerThreads: created worker thread 8

[Thr 5852] IcmCreateWorkerThreads: created worker thread 9

[Thr 5852] IcmCreateWorkerThreads: created worker thread 10

[Thr 5852] IcmCreateWorkerThreads: created worker thread 11

[Thr 5852] IcmCreateWorkerThreads: created worker thread 12

[Thr 5852] IcmCreateWorkerThreads: created worker thread 13

[Thr 5852] IcmCreateWorkerThreads: created worker thread 14

[Thr 5852] IcmCreateWorkerThreads: created worker thread 15

[Thr 5852] IcmCreateWorkerThreads: created worker thread 16

[Thr 5852] IcmCreateWorkerThreads: created worker thread 17

[Thr 5852] IcmCreateWorkerThreads: created worker thread 18

[Thr 5852] IcmCreateWorkerThreads: created worker thread 19

[Thr 5852] IcmCreateWorkerThreads: created worker thread 20

[Thr 5852] IcmCreateWorkerThreads: created worker thread 21

[Thr 5852] IcmCreateWorkerThreads: created worker thread 22

[Thr 5852] IcmCreateWorkerThreads: created worker thread 23

[Thr 5852] IcmCreateWorkerThreads: created worker thread 24

[Thr 5852] IcmCreateWorkerThreads: created worker thread 25

[Thr 5852] IcmCreateWorkerThreads: created worker thread 26

[Thr 5852] IcmCreateWorkerThreads: created worker thread 27

[Thr 5852] IcmCreateWorkerThreads: created worker thread 28

[Thr 5852] IcmCreateWorkerThreads: created worker thread 29

[Thr 5852] IcmCreateWorkerThreads: created worker thread 30

[Thr 5852] IcmCreateWorkerThreads: created worker thread 31

[Thr 5852] IcmCreateWorkerThreads: created worker thread 32

[Thr 5852] IcmCreateWorkerThreads: created worker thread 33

[Thr 5852] IcmCreateWorkerThreads: created worker thread 34

[Thr 5852] IcmCreateWorkerThreads: created worker thread 35

[Thr 5852] IcmCreateWorkerThreads: created worker thread 36

[Thr 5852] IcmCreateWorkerThreads: created worker thread 37

[Thr 5852] IcmCreateWorkerThreads: created worker thread 38

[Thr 5852] IcmCreateWorkerThreads: created worker thread 39

[Thr 5852] IcmCreateWorkerThreads: created worker thread 40

[Thr 5852] IcmCreateWorkerThreads: created worker thread 41

[Thr 5852] IcmCreateWorkerThreads: created worker thread 42

[Thr 5852] IcmCreateWorkerThreads: created worker thread 43

[Thr 5852] IcmCreateWorkerThreads: created worker thread 44

[Thr 5852] IcmCreateWorkerThreads: created worker thread 45

[Thr 5852] IcmCreateWorkerThreads: created worker thread 46

[Thr 5852] IcmCreateWorkerThreads: created worker thread 47

[Thr 5852] IcmCreateWorkerThreads: created worker thread 48

[Thr 5852] IcmCreateWorkerThreads: created worker thread 49

[Thr 4204] IcmWatchDogThread: watchdog started

[Thr 4248] ISC: created 400 MB disk cache.

[Thr 4248] ISC: created 50 MB memory cache.

[Thr 4248] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0

[Thr 4248] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0

[Thr 4248] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0

[Thr 4248] Started service 1080 for protocol HTTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout

[Thr 4248] =================================================

[Thr 4248] = SSL Initialization on PC with Windows NT

[Thr 4248] = (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)

[Thr 4248] SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"

resulting Filename = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"

[Thr 4248] = found SAPCRYPTOLIB 5.5.5C pl24 (Jun 11 2008) MT-safe

[Thr 4248] = current UserID: I2\SAPServiceCC5

[Thr 4248] = found SECUDIR environment variable

[Thr 4248] = using SECUDIR=D:\usr\sap\CC5\DVEBMGS00\sec

[Thr 4248] = Success SapCryptoLib SSL ready!

[Thr 4248] =================================================

[Thr 4248] Started service 8443 for protocol HTTPS on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou

[Thr 4248] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout

[Thr 2464] MPI<4>1#3 Peak buffer usage: 1 (@ 64 KB)

[Thr 2112] MPI<5>2#3 Peak buffer usage: 2 (@ 64 KB)

[Thr 4248] Thu Jan 15 23:09:26 2009

[Thr 4248] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c 1065]

[Thr 4248] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c

[Thr 200] Thu Jan 15 23:09:36 2009

[Thr 200] MPI<7>4#3 Peak buffer usage: 3 (@ 64 KB)

[Thr 4092] MPI<9>6#3 Peak buffer usage: 4 (@ 64 KB)

[Thr 1660] Thu Jan 15 23:09:40 2009

[Thr 1660] MPI<b>8#3 Peak buffer usage: 6 (@ 64 KB)

[Thr 3168] Fri Jan 16 00:02:52 2009

[Thr 3168] *** WARNING => Connection request from (8/24/1) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)

RM-T8, U24, 600 AVISHNU, GX280I576YB1S, 00:02:47, M1, W1, SEU_, 3/2 [icxxconn.c 2121]

[Thr 3684] Fri Jan 16 00:04:40 2009

[Thr 3684] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 3804] Fri Jan 16 00:04:56 2009

[Thr 3804] Deactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 2664] Fri Jan 16 00:09:26 2009

[Thr 2664] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]

[Thr 3516] Fri Jan 16 00:23:53 2009

[Thr 3516] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]

[Thr 4116] Fri Jan 16 00:26:53 2009

[Thr 4116] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]

[Thr 4112] Fri Jan 16 00:27:07 2009

[Thr 4112] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]

[Thr 1684] Fri Jan 16 00:34:23 2009

[Thr 1684] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]

[Thr 3516] Fri Jan 16 00:46:52 2009

[Thr 3516] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 3516] Reactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 3468] Fri Jan 16 01:29:23 2009

[Thr 3468] *** WARNING => Connection request from (9/25/0) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)

RM-T9, U25, 600 SRAJEEV, GX_XP2BASE:0, 01:29:18, M0, W0, SEU_, 2/2 [icxxconn.c 2121]

[Thr 1660] Fri Jan 16 02:00:47 2009

[Thr 1660] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 196] Fri Jan 16 02:00:57 2009

[Thr 196] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 2292] Fri Jan 16 02:13:41 2009

[Thr 2292] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 4108] Fri Jan 16 02:14:05 2009

[Thr 4108] IcmChangeService: change service 1080 for HTTP to 8080

[Thr 4108] Reactivated service 8080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)

[Thr 4208] Fri Jan 16 02:15:24 2009

[Thr 4208] *** WARNING => Connection request from (8/24/3) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)

Regards,

vishnu

Edited by: vishnuarigela on Jan 16, 2009 10:05 AM

Edited by: vishnuarigela on Jan 16, 2009 10:20 AM

[Former Member]

Hi,

Do you want to call an external web service from your abap system or do you want to answer a web service call from your abap system ?

From your logs, it seems that you want to call the web service on an external server

host: 10.20.232.89, service: 4444

And that the connection fails.

Are the IP and the port right ?

Is there an HTTP server listening to port 4444 ?

Are you able to ping the 10.20.232.89 host from your abap system ?

You can also increase the ICM trace level to 3 to to get more error details

Regards,

Olivier

[Former Member]

Hi Olivier,

I want to ensure that ICF /HTTP services are active and in running state. For that, I am just trying to execute the Client Proxy ZI2_CO_ROI_R3_DFPORT_TYPE.

I followed the below steps:

Logon to Server ECC 5 client 600

1. SE80

2. Edit Object - Enterprise Services

3. Choose radio button client proxy - enter ZI2_CO_ROI_R3_DFPORT_TYPE

4. display

5. press F8

6. press check boxes for a) Initial Complex Elements b) XML Editor c) Extended XML handling

7. Press execute

After this I got the below error,

SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</

How to correct this

Thanks,

vishnu

[manu_susankar]

Hi vishnuarigela,

For ICF /HTTP service activation could you plaese check the below URL:

http://help.sap.com/saphelp_nw04/helpdata/EN/f3/f8193c99f5a765e10000000a11402f/content.htm

Regards,

S.Manu.

[Former Member]

Hi,

So, in fact, it seems that you try to call the SAP abap web service from the SAP abap system.

Your logical port is wrong because you try to connect on port 4444 which is not activated on your ICM.

Regards,

Olivier

[Former Member]

Hi Olivier,

How do I correct the logical port problem?

Thank you very much.

Regards,

vishnu

[Former Member]

Hi again,

You have to create a logical port which points towards your own server (host:port).

Olivier

[Former Member]

Hi Olivier,

Thanks a lot for your reply,

By using logical port, do we point to the location where the wsdl is located.

I am unable to ping the ip address, that is in the trace file.

So, can we change the logical port to where the wsdl is actually located? I think this should work.

Please correct me if I am wrong.

Regards,

vishnu.

[Former Member]

Hi,

The logical port is used at runtime to point to the web service provider host.

It is not used to get the wsdl...

Regards,

Olivier

[Former Member]

Hi Olivier,

I know its been more than an year since the last time I have posted on this thread.

The problem still persists, I have made the necessary changes as you have suggested,

made the necessary changes to the logical port number.

The error has changed to no extended error message (SOAP_ESERVER).

In sm21:

SOAP Runtime: SOAP Runtime exception: 112 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1

SOAP Runtime: Exception message: no extended error message (SOAP_ESERVER)

dev_rfc:

ERROR 01:01:48: SOAP Application CL_SOAP_APPLICATION_CLIENT

IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING() A SOAP Runtime Core

Exception occurred in method XP_READ_TAG of class CL_SOAP_XP at

position id 1 with internal error id 112 and error text no

extended error message (SOAP_ESERVER) (fault location is 1 ).

Any suggestions would be greatly appreciated. I have looked up on sdn, however was

unable to find a solution.

I have opened another thread under Netweaver Administrator with the subject SOAP Exception,

I apologize if it was a mistake.

Regards,

Vishnu.

Edited by: vishnuarigela on Feb 11, 2010 9:36 AM

Edited by: vishnuarigela on Feb 11, 2010 9:37 AM

Edited by: vishnuarigela on Feb 11, 2010 9:38 AM

Edited by: vishnuarigela on Feb 11, 2010 11:46 AM

[Former Member]

Hi,

Any suggestions would be greatly appreciated.

Regards,

Vishnu.

[shyam_dontamsetty]

Hi Vishnu,

GX280I576YB1S, 00:02:47, M1, W1, SEU_, 3/2 [icxxconn.c 2121] [Thr 3684] Fri Jan 16 00:04:40 2009 [Thr 3684] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30) [Thr 3804]

Have u activated the service in SICF for the Webservice that you trying to access your system?

Best Regards

Shyam Dontamsetty

[Former Member]

Hi Vishnu,

please check if the Enterprise Search Java system is up.

Regards,

Tripti

[Former Member]

Hi Tripti,

We dont have Java Instance, it is only WebAS ABAP.

Regards,

Vishnu