on 01-13-2009 10:06 PM
Hi Experts,
I have installed a a Netweaver 7.01 when i start the server throught MMC
first the dispatcher show the message as unable to reach teh message server
but where as message server is running successfully.
after few seconds it shows the status Stopped
Below is my trace please help me to solve this issue.
Thanks,
Veeru.
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 3892
Wed Jan 14 05:46:37 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3892) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 14 05:46:39 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0121.qqq.nxst) took 2 seconds
Wed Jan 14 05:46:44 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Veeru_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04ED0040, size: 4205552)
DpShMCreate: allocated sys_adm at 04ED0040
DpShMCreate: allocated wp_adm at 04ED1A28
DpShMCreate: allocated tm_adm_list at 04ED32E0
DpShMCreate: allocated tm_adm at 04ED3310
DpShMCreate: allocated wp_ca_adm at 052435A0
DpShMCreate: allocated appc_ca_adm at 05243A50
DpShMCreate: allocated comm_adm at 05243F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052C4DB0
DpShMCreate: allocated gw_adm at 052C4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052C4E20
DpShMCreate: allocated wall_adm at 052C4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Wed Jan 14 05:46:50 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> NTGetBaseAddress failed, no free region [esnti.c 1450]
Error 15 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9556]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9485]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:00 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jan 13 21:47:00 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Jan 13 21:47:00 2009
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 0 | 2000 | 0 | 0 |
--------
+
DIA | 0 | 0 | 2000 | 0 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Tue Jan 13 21:47:00 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Jan 13 21:47:00 2009
=============================
Slots: 20, Used: 0, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:05 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Veeru_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
Wed Jan 14 05:47:06 2009
***LOG Q05=> DpHalt, DPStop ( 3892) [dpxxdisp.c 10333]
Good Bye .....
I had a similar problem yesterday...I had done a whole lots of stuff, courtesy this forum, before i stumbled on this thread. I couldn't believe all i needed to do was just to increase the virtual memory on my system,...am running my sap box in a VM,...so i added more 'physical' memory in my VM settings...and boom, it worked...disp+work process turned green.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Shared Memory problem. How much is the memory on system you did your installation. Try to reboot
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Eric,
Actually in my NSP_DVEBMS00_VEERU thePHYS_MEMSIZE is set to 128
So.....
Do i need to change in the here below file.....:
If yes wht shall i change it to ?
Template for ABAP SID_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = Veeru
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PHYS_MEMSIZE = 128
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
#----
SAP Messaging Service parameters are set in the DEFAULT.PFL
#----
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_spo = 1
rdisp/enqname = Veeru_NSP_00
rdisp/myname = Veeru_NSP_00
abap/buffersize = 100000
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/installed_languages = ED
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 250000
rdisp/PG_SHM = 100
rdisp/ROLL_SHM = 100
rdisp/autoabaptime = 0
rdisp/bufrefmode = sendoff,exeoff
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 300
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
icm/host_name_full = localhost
mpi/total_size_MB = 10
auth/new_buffering = 1
sapgui/user_scripting = TRUE
ssf/name = SAPSECULIB
ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
login/ticket_only_to_host = 1
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP
check SAP note 88416.
you ran out of memory. what value was chosen for PHYS_MEMSIZE ?
the "network" errors do not cause your problems and you can ignore them.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.