Java Stack down issue

[Former Member]

Hi All,

This is kamal , i installed a SAP tool named GRC access control , during that i need to give connectivity

with backend system.for that i defiend two program ID in visual admin 1. LCRSAPRFC, SAPSLDAPI.

LCRSAPRFC works successfully but when i defiend SAPSLDAPI in JCO RFC provider in visual admin after that visual admin is connected up to 99% only . and java stack is down .

now still java stack in the same condition , this is coming up .

i am putting some log also of instance profile.

jstartup/trimming_properties = off

jstartup/protocol = on

jstartup/vm/home = C:\j2sdk1.4.2_09

jstartup/max_caches = 500

jstartup/release = 700

jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties)

j2ee/dbdriver = $(DIR_EXECUTABLE)\ojdbc14.jar

PHYS_MEMSIZE = 512

can you please suggest ..

Thanks

Kamal Taneja

<MOVED BY MODERATOR TO THE CORRECT FORUM>

Edited by: Alvaro Tejada Galindo on Jan 8, 2009 9:36 AM

[Former Member]

Hi Vit ,

Actuly as i have written the server0 is in starts app state so i am not able to open http://<host name>:<port>/<index>. which you have written. so once the server will up the and only then i can open this URL...

Thanks

Kamal Taneja

[Former Member]

Hi Kamal,

Try to setup memory settings according to note 723909 in Config Tool and restart.

It might be a memory leak. For that there is no simple answers.

[Former Member]

Hi Kamal

SLD has it own engine. You dont need to register them in VA.

Go to: http://<host>:<port>/sld

Technical systems

Technical System Type: ALL

If correctly set up you will se both your backend and J2EE engine registred.

If not, set up SLD according to the manual, you will find it at http://<host>:<port>/sld/doc/sld.pdf

If NW is freshly installed, you can run the Configuration Wizard

http://<host>:<port>/index.html

SAP NetWeaver Administrator

Deploy and Change

NWA_01 - NWA_07

Regards,

Vit

[Former Member]

Hi ,

This is kamal taneja. i am facing one issue during insatalltion of SAP GRC 5.3v access control. during connectivity of tool system to backend system i need to upload two program IDs(LCRSAPRFC, SAPSLDAPI) in visual admin and in backend i need to deifne TCP/IP connection.

but when i upload LCRSAPRFC in JCO RFC provider in visual admin in java it works successfully but during uploading SAPSLDAPI , visual admin gets hanged and goes up to 99% only. on the other side when i take restart of java stack then server0 instance gets down or goes upto starts App only and stuck at that point only.

can you please suggest some solution to overcome this issue.

please find the developer trace also....

-

---

trc file: "E:\usr\sap\PRD\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"

-

---

node name : ID2537250

pid : 5020

system name : PRD

system nr. : 00

started at : Fri Jan 16 19:29:04 2009

arguments :

arg[00] : E:\usr\sap\PRD\DVEBMGS00\exe\jlaunch.exe

arg[01] : pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_xiserver

arg[02] : -DSAPINFO=PRD_00_server

arg[03] : pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_xiserver

arg[04] : -DSAPSTART=1

arg[05] : -DCONNECT_PORT=1798

arg[06] : -DSAPSYSTEM=00

arg[07] : -DSAPSYSTEMNAME=PRD

arg[08] : -DSAPMYNAME=xiserver_PRD_00

arg[09] : -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_xiserver

arg[10] : -DFRFC_FALLBACK=ON

arg[11] : -DFRFC_FALLBACK_HOST=localhost

[Thr 2160] Fri Jan 16 19:29:04 2009

[Thr 2160] *** WARNING => INFO: Unknown property [instance.box.number=PRDDVEBMGS00xiserver] [jstartxx.c 841]

[Thr 2160] *** WARNING => INFO: Unknown property [instance.en.host=xiserver] [jstartxx.c 841]

[Thr 2160] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c 841]

[Thr 2160] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c 841]

**********************************************************************

JStartupReadInstanceProperties: read instance properties [E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties]

-> ms host : xiserver

-> ms port : 3901

-> OS libs : E:\usr\sap\PRD\DVEBMGS00\j2ee\os_libs

-> Admin URL :

-> run mode : NORMAL

-> run action : NONE

-> enabled : yes

**********************************************************************

**********************************************************************

Used property files

-> files [00] : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

**********************************************************************

**********************************************************************

Instance properties

-> ms host : xiserver

-> ms port : 3901

-> os libs : E:\usr\sap\PRD\DVEBMGS00\j2ee\os_libs

-> admin URL :

-> run mode : NORMAL

-> run action : NONE

-> enabled : yes

**********************************************************************

**********************************************************************

Bootstrap nodes

-> [00] bootstrap : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

-> [01] bootstrap_ID2537200 : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

-> [02] bootstrap_ID2537250 : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

**********************************************************************

**********************************************************************

Worker nodes

-> [00] ID2537200 : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

-> [01] ID2537250 : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\instance.properties

**********************************************************************

[Thr 2160] JLaunchRequestQueueInit: create named pipe for ipc

[Thr 2160] JLaunchRequestQueueInit: create pipe listener thread

[Thr 896] JLaunchRequestFunc: Thread 896 started as listener thread for np messages.

[Thr 1648] WaitSyncSemThread: Thread 1648 started as semaphore monitor thread.

[Thr 2160] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)

[Thr 2160] CPIC (version=700.2006.09.13)

[Thr 2160] [Node: server0] java home is set by profile parameter

Java Home: C:\j2sdk1.4.2_09

[Thr 2160] JStartupICheckFrameworkPackage: can't find framework package E:\usr\sap\PRD\DVEBMGS00\exe\jvmx.jar

**********************************************************************

JStartupIReadSection: read node properties [ID2537250]

-> node name : server0

-> node type : server

-> node execute : yes

-> jlaunch parameters :

-> java path : C:\j2sdk1.4.2_09

-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer

-> java vm version : 1.4.2_09-b05

-> java vm vendor : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)

-> java vm type : server

-> java vm cpu : x86

-> heap size : 1024M

-> init heap size : 1024M

-> root path : E:\usr\sap\PRD\DVEBMGS00\j2ee\cluster\server0

-> class path : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.

-> OS libs path : E:\usr\sap\PRD\DVEBMGS00\j2ee\os_libs

-> main class : com.sap.engine.boot.Start

-> framework class : com.sap.bc.proj.jstartup.JStartupFramework

-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives

-> framework path : E:\usr\sap\PRD\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\PRD\DVEBMGS00\exe\jvmx.jar

-> shutdown class : com.sap.engine.boot.Start

-> parameters :

-> debuggable : no

-> debug mode : no

-> debug port : 50021

-> shutdown timeout : 120000

**********************************************************************

[Thr 2160] JLaunchISetDebugMode: set debug mode [no]

[Thr 2524] JLaunchIStartFunc: Thread 2524 started as Java VM thread.

**********************************************************************

JHVM_LoadJavaVM: VM Arguments of node [server0]

-> stack : 262144 Bytes

-> arg[ 0]: exit

-> arg[ 1]: abort

-> arg[ 2]: vfprintf

-> arg[ 3]: -Djava.security.policy=./java.policy

-> arg[ 4]: -Djava.security.egd=file:/dev/urandom

-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy

-> arg[ 6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy

-> arg[ 7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy

-> arg[ 8]: -Djco.jarm=1

-> arg[ 9]: -XX:MaxPermSize=256M

-> arg[ 10]: -XX:PermSize=256M

-> arg[ 11]: -XX:NewSize=171M

-> arg[ 12]: -XX:MaxNewSize=171M

-> arg[ 13]: -verbose:gc

-> arg[ 14]: -Xloggc:GC.log

-> arg[ 15]: -XX:+PrintGCDetails

-> arg[ 16]: -XX:+PrintGCTimeStamps

-> arg[ 17]: -Djava.awt.headless=true

-> arg[ 18]: -Dsun.io.useCanonCaches=false

-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1

-> arg[ 20]: -XX:SurvivorRatio=2

-> arg[ 21]: -XX:TargetSurvivorRatio=90

-> arg[ 22]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer

-> arg[ 23]: -Dsys.global.dir=E:\usr\sap\PRD\SYS\global

-> arg[ 24]: -Dapplication.home=E:\usr\sap\PRD\DVEBMGS00\exe

-> arg[ 25]: -Djava.class.path=E:\usr\sap\PRD\DVEBMGS00\exe\jstartup.jar;E:\usr\sap\PRD\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.

-> arg[ 26]: -Djava.library.path=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;C:\j2sdk1.4.2_09\bin;E:\usr\sap\PRD\DVEBMGS00\j2ee\os_libs;E:\oracle\PRD\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_09\bin;E:\oracle\PRD\102\BIN;E:\usr\sap\PRD\SYS\exe\uc\NTI386

-> arg[ 27]: -Dmemory.manager=1024M

-> arg[ 28]: -Xmx1024M

-> arg[ 29]: -Xms1024M

-> arg[ 30]: -DLoadBalanceRestricted=no

-> arg[ 31]: -Djstartup.mode=JCONTROL

-> arg[ 32]: -Djstartup.ownProcessId=5020

-> arg[ 33]: -Djstartup.ownHardwareId=L1200246929

-> arg[ 34]: -Djstartup.whoami=server

-> arg[ 35]: -Djstartup.debuggable=no

-> arg[ 36]: -DSAPINFO=PRD_00_server

-> arg[ 37]: -DSAPSTART=1

-> arg[ 38]: -DCONNECT_PORT=1798

-> arg[ 39]: -DSAPSYSTEM=00

-> arg[ 40]: -DSAPSYSTEMNAME=PRD

-> arg[ 41]: -DSAPMYNAME=xiserver_PRD_00

-> arg[ 42]: -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_xiserver

-> arg[ 43]: -DFRFC_FALLBACK=ON

-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost

-> arg[ 45]: -DSAPSTARTUP=1

-> arg[ 46]: -DSAPSYSTEM=00

-> arg[ 47]: -DSAPSYSTEMNAME=PRD

-> arg[ 48]: -DSAPMYNAME=xiserver_PRD_00

-> arg[ 49]: -DSAPDBHOST=xiserver

-> arg[ 50]: -Dj2ee.dbhost=xiserver

**********************************************************************

CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources

CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain

CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub

CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS

CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices

CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile

CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup

CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue

CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode

CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode

CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects

CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement

CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence

CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations

CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto

[Thr 2524] JHVM_LoadJavaVM: Java VM created OK.

**********************************************************************

JHVM_BuildArgumentList: main method arguments of node [server0]

**********************************************************************

[Thr 2828] Fri Jan 16 19:29:06 2009

[Thr 2828] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes

[Thr 2828] Fri Jan 16 19:29:07 2009

[Thr 2828] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework

[Thr 2828] JLaunchISetClusterId: set cluster id 2537250

[Thr 2828] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]

[Thr 2828] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]

[Thr 3124] Fri Jan 16 19:29:30 2009

[Thr 3124] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver

[Thr 3124] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI

[Thr 3124] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress

[Thr 4360] Fri Jan 16 19:29:36 2009

[Thr 4360] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface

[Thr 2828] Fri Jan 16 19:29:56 2009

[Thr 2828] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]

Thanks

kamal Taneja

[Former Member]

Hi ,

Please check the JVM settings that need to be made in the config tool.And one more thing have you maintained entries in tcode SLDAPICUST in the backend system .You will have to give the hostname of the system where GRC is installed and Gateway service of that .

[Former Member]

Hi,

I installed NW200s where Java and ABAP stach both are there and its was running fine due to some performance issue i needed to restart it , but for some time Disp_work. .exe was in yellow color and after that it came down immediatly and all the workprocess comes in ended status and showing me grey color. even in j2ee process nothing is there.

i went through some of the solution thread but it doent work for me . i m putting developer trace of disp_work.exe also .

your reponse would be highly appriciable...

-

---

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

DpStartStopMsg: stop msg sent

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 3 recv would block (errno=EAGAIN)

NiIRead: read for hdl 3 timed out (0ms)

DpHalt: no more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

send msg (len 110+4) to name MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiIRead: hdl 3 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 3 (r)

NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 3

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -

Received 4 bytes from MSG_SERVER

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsSendKeepalive : keepalive sent to message server

NiIRead: hdl 3 recv would block (errno=EAGAIN)

Thu Aug 20 12:41:56 2009

NiIPeek: peek for hdl 3 timed out (r; 1000ms)

NiIRead: read for hdl 3 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]

NiBufSend starting

NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0

SiSelNSet: set events of sock 1444 to: ---

NiBufISelRemove: remove hdl 3 from set0

SiSelNRemove: removed sock 1444 (pos=3)

SiSelNRemove: removed sock 1444

NiSelIRemove: removed hdl 3

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13

LOCK WP ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 3 / sock 1444

NiBufIClose: clear extension for hdl 3

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 5216) [dpxxdisp.c 10421]

Good Bye .....

[Former Member]

Hi..

Just check for the SAP notes related to Memory parameter.

1) Note 723909 - Java VM settings for J2EE 6.40/7.0

2) Note 710146 - How to change J2EE Engine JVM Settings

Some of the parameters we need to set in Config tool.

-XX:NewSize=341m

-XX:MaxNewSize=341m

-XX:SurvivorRatio=2

-XX:TargetSurvivorRatio=90

-XX:MaxPermSize=512m

-XX:PermSize=512m

-XX:+UseParNewGC

-XX:+DisableExplicitGC

-Xmx2048m

-verbose:gc

Hope this will help you resolve the problem.

Regards

Gangadhar

.

[Former Member]

Hi Gangadhar,

Thanks for your valuable suggestions,, my issue has been resolved but dear the solution was something else....

the connectivity between Database and application was not there and some issue with memory and license key was there.

after putting all the required information my issue has been resolved...

Thanks

Kamal Taneja

[Former Member]

An exception occurred that is explained in detail below.

The function module " " is called,

but cannot be found in the library.

Error in the ABAP Application Program

The current ABAP program "SAPLEEDM_UI_EXT_SELECTION" had to be terminated

because it has

come across a statement that unfortunately cannot be executed.

The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was

not caught in

procedure "ACTION_SEL_DEFAULT" "(FORM)", nor was it propagated by a RAISING

clause.

Since the caller of the procedure could not have anticipated that the

exception would occur, the current program is terminated.

The reason for the exception is:

The program "SAPLEEDM_UI_EXT_SELECTION" contains the CALL FUNCTION statement.

The name of the function module to be called is " ".

No function module exists with the name " ".

All function modules are listed in the Function Library (SE37).

-

Possible reasons:

a) Wrong name specified. Pay particular attention to

upper/lower case and underscores ("_").

or

b) Transport error

c) In the case of an enqueue/dequeue module,

the lock object may not have been activated

(ABAP/4 Dictionary).

[Former Member]

Moved to the GRC Forum.