Netweaver unable to start

[Former Member]

Currently i'm having difficulties in starting the netweaver server. In the SAP Management Console, whenever i start the server, only enserver.EXE able to start while msg_server.EXE, disp+work.EXE and igswd.EXE unable to start. I tried to start it one by one but it will automatically stop after around 5 sec i click the start. I not sure which log should i look into it, but i tried check some of the log file and i found out this.

stderr1

D:\usr\sap\E01\SCS87\exe\msg_server.EXE=>sapparam(2): fopenU("D:\usr\sap\E01\SYS\profile\E01_SCS87_edev01","r"): No such file or directory
D:\usr\sap\E01\SCS87\exe\msg_server.EXE=>No Profile used.
D:\usr\sap\E01\SCS87\exe\msg_server.EXE=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 9208] Mon Dec 22 10:00:29 2008
[Thr 9208] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c   170]
[Thr 9208] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c   87]
[Thr 9208] *** ERROR => mainU: MsSPrvInit [msxxserv.c   1634]

sapcpe_scs.log

================ >>> main =======================
INFO:    sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#17 $ SAP
=================================================
INFO:    working only on the File-List D:\usr\sap\E01\SYS\exe\uc\NTAMD64/scs.lst 
WARNING: unknown SAPSYSTEMNAME from the profiles
INFO:    Try to find file table sapcpeft (default:sapcpeft)
INFO:    Try to find file table in the central directory 
edev01\sapmnt
SYS\exe\UC\NTAMD64\sapcpeft
INFO:    not found any file table.
=================================================
 Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2008/12/22 10:00:26
ERROR:   can't change to local Executable-Dir 
edev01\sapmnt
SYS\exe\run (No such file or directory) 2 [sapxxcpe.c:1460]

dev_ms

[Thr 544] Tue Dec 16 13:02:30 2008
[Thr 544] MsSExit: received SIGINT (2)
[Thr 544] ***LOG Q02=> MsSHalt, MSStop (Msg Server 9340) [msxxserv.c   5934]

Hope the log do show the error for the NW unable to start.

Thanks

[Former Member · Accepted solution]

Hi Adrian Chan, try to check first "sapstart.log" in work folder ...

P.S. what do you see in D:\usr\sap\E01\SYS\profile ?

Regards.

[Former Member · Accepted solution]

Thanks for your prompt reply.

sapstart.log

SAP-R/3-Startup Program
Starting at 2008/12/22 10:00:24
Startup Profile: "D:\usr\sap\E01\SYS\profile\START_SCS87_edev01"
Starting Programs
(5028) Execute: D:\usr\sap\E01\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=D:\usr\sap\E01\SYS\profile\E01_SCS87_edev01 list:D:\usr\sap\E01\SYS\exe\uc\NTAMD64/scs.lst
(3820) CreateProcess: D:\usr\sap\E01\SCS87\exe\msg_server.EXE pf=D:\usr\sap\E01\SYS\profile\E01_SCS87_edev01
(1560) CreateProcess: D:\usr\sap\E01\SCS87\exe\enserver.EXE pf=D:\usr\sap\E01\SYS\profile\E01_SCS87_edev01

I can't find the profile folder in my D:\usr\sap\E01\SYS

In that SYS folder only have exe, gen and global folder. It seem like something not right.... as the startup profile try to call the START_SCS87_edasdev01 which is not in the folder rite.

[Former Member · Accepted solution]

You are on intsallation stage of NW or it's already running system? You must have this folder ... Without this your sap will not come up ...

Regards.

[Former Member · Accepted solution]

Yup.

Actually the system is up. But I'm doing some development then i restart the server. I realized the folder had been moved to another place which I don't know why. I found the folder and then copied the folder. Now the disp+work unable to up. Wondering what else i had missed out.

Thanks.

[Former Member · Accepted solution]

Check dev_w0 and dev_disp if you cant start DISP+WORK.

Regards.

[Former Member · Accepted solution]

I had checked the log but it too long to post everything at here.

This is what I found out.

dev_disp

Mon Dec 22 18:45:54 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Dec 22 18:46:20 2008
ERROR => gateway (pid 7356) died [dpxxdisp.c   15495]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
[DpWpDied] W0 lives  (PID:8180  HANDLE:1316)
killing W0-8180 (SIGUSR2)
[DpWpDied] W1 lives  (PID:9800  HANDLE:1176)
killing W1-9800 (SIGUSR2)
[DpWpDied] W2 lives  (PID:1892  HANDLE:1148)
killing W2-1892 (SIGUSR2)
[DpWpDied] W3 lives  (PID:6964  HANDLE:1120)
killing W3-6964 (SIGUSR2)
[DpWpDied] W4 lives  (PID:7532  HANDLE:1108)
killing W4-7532 (SIGUSR2)
[DpWpDied] W5 lives  (PID:728  HANDLE:1092)
killing W5-728 (SIGUSR2)
[DpWpDied] W6 lives  (PID:9488  HANDLE:1048)
killing W6-9488 (SIGUSR2)
[DpWpDied] W7 lives  (PID:9220  HANDLE:992)
killing W7-9220 (SIGUSR2)
[DpWpDied] W8 lives  (PID:2632  HANDLE:956)
killing W8-2632 (SIGUSR2)
[DpWpDied] W9 lives  (PID:5376  HANDLE:904)
killing W9-5376 (SIGUSR2)
[DpWpDied] W10 lives  (PID:4832  HANDLE:884)
killing W10-4832 (SIGUSR2)
[DpWpDied] W11 lives  (PID:2116  HANDLE:872)
killing W11-2116 (SIGUSR2)
[DpWpDied] W12 lives  (PID:10228  HANDLE:832)
killing W12-10228 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1669
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Dec 22 18:46:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)			Mon Dec 22 10:46:30 2008

dev_w0

M  -
M Mon Dec 22 18:46:35 2008
M  in_ThErrHandle: 1
M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN    
M  ThIErrHandle: I'm during shutdown
M  PfStatDisconnect: disconnect statistics
M  Entering ThSetStatError
M  ThIErrHandle: don't try rollback again
M  ThShutDownServer: shutdown server
M  PfStatIndInit: Initializing Index-Record 
M  PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M  Entering ThReadDetachMode
M  NiIWrite: hdl 0 sent data (wrt=96,pac=1,MESG_IO)
M  NiICloseHandle: shutdown and close hdl 0 / sock 288
M  call ThrShutDown (1)...
M  ThDBDisconnect: disconnect from data base
B  Disconnecting from ALL connections:
B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost          
B  000 000 R/3              000000000 INACTIVE     NO  YES NO  000 255 255 20081222 184552 EDEV01       
C  Disconnecting from connection 0 ...
C  Closing user session (con_hdl=0,svchp=000000000AB94B48,usrhp=000000000AB8FC78)
C  Detaching from DB Server (con_hdl=0,svchp=000000000AB94B48,srvhp=0000000013881118)
C  Now I'm disconnected from ORACLE
B  Disconnected from connection 0
B  statistics db_con_commit (com_total=34, com_tx=26)
B  statistics db_con_rollback (roll_total=0, roll_tx=0)
M  ThDBDisconnect: disconnect o.k.
M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 8180) [dpnttool.c   327]
M  call semaphore clean-up function ...
M  Good Bye .....

Not sure the info i posted correct or not. But it do show something is shutdown and i not sure what is the cause for it.

[Former Member · Accepted solution]

Do some steps .. Try to restart your server (OS) after login in system under "SID"adm user, try to start

SAP and check same logs (dev_w0 and dev_disp) it will contain only newest information , if it will no so big post here, also execute in CMD --> R3trans -d and find the "trans.log" file in same directory where you execute this -->

C:\Documents and Settings\username> R3trans -d

check in C:\Documents and Settings\username

Regards.

[Former Member · Accepted solution]

So sorry for late reply. I was away for 2 week.

After i moved the file to the folder as i said it unable to start also but then after 1 day, it able to start and running as expected. Maybe it not yet refresh when i paste it. But i didn't do any OS level of restart.

Thanks for the helps.

[Former Member]

Adrian,

If you are installing system, try to continue the installation. If fails - start again from the scratch.

Your system is running already, look for /profile/ directory on the server in case it was placed somewhere else (drag-drop error in Windows explorer?) or restore it from the backup.

Regards,

Slava.