on 11-03-2008 3:29 PM
Hello there,
I have come across an error which says the following.
1.Function /RPM/RELATION_MODIFY (/RPM/RELATION_DATA 02) does not fit into the existing function group ((/RPM/CONFIG 15))
Transport the whole function group.
2.Table /RPM/ITEM_STATUS is not in nametab.
Does anyone know how to fix the issue.
Thanks
Druva
I have the same problem installing patch 01 any idea how to solve it?
no errors during test phase but import_proper failed.
Thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi, there !!
We ran into the same issue and the resolution was as follows:
1. Ensure Namespace /RPM is modifiable in SE06
2. Call transaction SE37
3.Enter /RPM/RELATION_MODIFY
4.Select Function module-> Other functions-> Rename
5.Rename it to /RPM/RELATION_MODIFY_OLD
6.Release the request if one was created in the process
7.Restart the phase
If you run into the following error, please follow the below steps:
1. Goto sm30->v_trnspace->maintain
2. Click twice on /RPM/ position,
3. In change mode you could reselect "C" value in Namespace role field and save it.
Try to rename to /RPM/RELATION_MODIFY_OLD again.
If you see this error in the TEST_IMPORT phase and if you can recalculate your queue, please do not include Support Packs 1 through 10 with the initial Add-On installation of CPRXRPM 4. Install the Add-On first and then apply the support packs as needed later on.
Madhavi
Hello
I´m in the standar mode and this is the complete log
Function /RPM/RELATION_MODIFY (/RPM/CONFIG 15) does not fit into the existing function group ((/RPM/RELATION_DATA 02))Transport the whole function group
Regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Un- answered
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks Druva and Aanand for your quick reply!
I did the procedure "ignore test import" but i think my problem y more strange because i am in the import_proper status so the procedure didnt work.
Any suggestions?
Regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Druva
I have the same problem, did you figured out the solution for this problem
Regards
Ricardo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
The error occurred in Test_Import phase and the following may help better. It says
Error during executing the tp command 'tp TST ALL SMD ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors' , tp output:
Thanks
Druva
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
24 | |
11 | |
9 | |
7 | |
6 | |
5 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.