on 10-28-2008 12:09 PM
Hi.
Im upgrading a 7.0 PI system to 7.1, and all was going well until the system asked about the mount points.
I have tried everything - the cds, the downloaded product.
Nothing seems to recognise the 'SAP Kernel DVD Unicode' folders /cds.
Its able to find the MID.xml file ok, but doesnt seem to recognise the mount point as a whole.
Is there anything I can check to make sure that I have the right version?
Andy
Andrew,
Were you able to make it work?
Thanks
S.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi.
As it turns out, my SAP PI version was at a SP level that was not supported to upgrade to 7.1
Therefore i had no choice but to install a new 7.1 instance.
The patch will be out mid-December to allow the upgrade from this SP level.
I assume this is where you other guys are having problems.....
Andy
Thank Andy.
I am at PI 7 Stack 15. What was your stack level when you had tried to upgrade? Is the announcement of release in mid december in a note or was it a SAP reply.
I appreciate your help. I have opened a message with SAP and they keep insisting I am downloading the wrong DVD, when I have given the material number, the directory structure etc. Very frustrating.
Thanks
S.
Olivier,
Thanks for the response.
Did you mean you extracted all your OS related kernel DVDs from the download list and put them in a single folder. Say in my case with OS SOLARIS_SPARC I download the followng:
51033245_1 NW 7.1 UC-Kernel 7.10 Solaris on SPARC 64bit Upgrade
51033245_2 NW 7.1 UC-Kernel 7.10 Solaris on SPARC 64bit
51033245_5 NW 7.1 Kernel 7.10 Solaris on SPARC 64bit Upgrade
51033245_8 NW 7.1 Kernel 7.10 Solaris on SPARC 64bit
Extract it in a sigle folder say /SAPCD/UCK
Give the mount point as /SAPCD/UCK/*
I tried this and it does'nt work. Or did you mean extract all Kernel DVDs regardless of OS and put them in a single folder. Maybe SAP did not name the DVDs right.
Your help is much appreciated.
Thanks
S.
Hello,
Your Kernel moint point should look like the following. You should put all KN_* KU_* folder in the same folder. Then SAPUP will be able to recognize all paths in the moint point.
CDLABEL.ASC
KN_LINUX_X86_64
KN_WINDOWS_IA64_AUPG
KU_WINDOWS_I
KU_WINDOWS_X86_64
README.TXT
CDLABEL.EBC
KN_LINUX_X86_64_AUPG
KN_WINDOWS_X86_64
KU_WINDOWS_I386
KU_WINDOWS_X86_64_AUPG
SHAFILE.DAT
COPY_TM.HTM
KN_WINDOWS_I386
KN_WINDOWS_X86_64_AUPG
KU_WINDOWS_I386_AUPG LABEL.ASC
VERSION.ASC
COPY_TM.TXT
KN_WINDOWS_I386_AUPG
KU_LINUX_X86_64
KU_WINDOWS_IA64
LABEL.EBC
VERSION.EBC
CRCFILE.DAT
KN_WINDOWS_IA64
KU_LINUX_X86_64_AUPG
KU_WINDOWS_IA64_AUPG LABELIDX.ASC
Best regards,
Olivier
Olivier,
The directory structure for SOLARIS Kernel is different:
____________
+*510332451 NW 7.1 UC-Kernel 7.10 Solaris on SPARC 64bit Upgrade*+_
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS:
CDLABEL.ASC COPY_TM.HTM DATA_UNITS LABEL.EBC MID.XML VERSION.ASC
CDLABEL.EBC COPY_TM.TXT LABEL.ASC LABELIDX.ASC SHAFILE.DAT VERSION.EBC
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS/DATA_UNITS:
K_710_UV_SOLARIS_SPARC LABELIDX.ASC
_____________________________
+*510332452 NW 7.1 UC-Kernel 7.10 Solaris on SPARC 64bit*+_
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS:
CDLABEL.ASC COPY_TM.HTM DATA_UNITS LABEL.EBC MID.XML VERSION.ASC
CDLABEL.EBC COPY_TM.TXT LABEL.ASC LABELIDX.ASC SHAFILE.DAT VERSION.EBC
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS/DATA_UNITS:
K_710_UI_SOLARIS_SPARC LABELIDX.ASC
_________________________________________________
+*510332455 NW 7.1 Kernel 7.10 Solaris on SPARC 64bit Upgrade*+_
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS:
CDLABEL.ASC COPY_TM.HTM DATA_UNITS LABEL.EBC MID.XML VERSION.ASC
CDLABEL.EBC COPY_TM.TXT LABEL.ASC LABELIDX.ASC SHAFILE.DAT VERSION.EBC
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS/DATA_UNITS:
K_710_NV_SOLARIS_SPARC LABELIDX.ASC
_____________________________________________________
+*510332458 NW 7.1 Kernel 7.10 Solaris on SPARC 64bit*+_
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS:
CDLABEL.ASC COPY_TM.HTM DATA_UNITS LABEL.EBC MID.XML VERSION.ASC
CDLABEL.EBC COPY_TM.TXT LABEL.ASC LABELIDX.ASC SHAFILE.DAT VERSION.EBC
/sapcd/XI_UPGRADE_PI71/UK/NW_7.1_Kernel_SOLARIS/DATA_UNITS:
K_710_NI_SOLARIS_SPARC LABELIDX.ASC
___________________________________________________________________________
With the above files what do you think a main directory /sapcd/XI_UPGRADE_PI71/UCK shoud like.
Thanks for your help.
Thanks
S.
Hi Andy
Were you able to resolve this, I am stuck at the same point
Thanks
Hari
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
24 | |
11 | |
9 | |
7 | |
6 | |
5 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.