on 10-01-2008 6:35 AM
Hi guys please help if possible
I am installing 4.6c the installation has stopped at 93% I have noticed my dispatcher shuts down after a few secounds My trace file is attached below. I also get a get a RFC errror at 93% where the installation has stopped shown below
Error: RFCRSWBOINI_IND_IND CRfcError 2 1038
RFC error
operation/code : RfcOpen()
key : RFC_IO5
status : CODE=CM_PRODUCT_SPECIFIC_ERROR STATUS=??? DATA=??? ID=???
message : connection closed
internal status: IO HANDLE=5 DRV=EXT LINE=416 CODE=5
Error: RFCRSWBOINI_IND_IND InstallationDo 2 1038
Phase failed.
Error: Main {} 2 1038
Installation aborted.
-
trc file: "dev_disp", trc level: 1, release: "46D"
-
Wed Oct 01 14:38:20 2008
relno 4640
patchlevel 0
patchno 2364
intno 0
pid 1860
***LOG Q00=> DpSapEnvInit, DPStart (00 1860) [dpxxdisp.c 921]
Wed Oct 01 14:38:32 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0001.qqq.nxst) took 12 seconds
Wed Oct 01 14:38:48 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust your DNS settings [dpxxtool2.c 3171]
MtxInit: -2 0 0
DpIPCInit: start server >SAPDRQ_DRQ_00 <
MBUF state OFF
MBUF opmode USE
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2252 MB
<ES> 2251 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPDRQ) [dpxxdisp.c 8384]
MBUF set hwid_state to HWID_PENDING
DpStartStopMsg: send start message (myname is >SAPDRQ_DRQ_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 10000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 4640, patchlevel 0
MBUF state PREPARED
MBUF component UP
MBUF set hwid_state to SAP_O_K (G0606866136 )
DpMsgAdmin: Set patchno for this platform to 2364
Release check o.K.
Wed Oct 01 14:40:28 2008
ERROR => W0 (pid 1832) died [dpxxdisp.c 10701]
ERROR => W1 (pid 2492) died [dpxxdisp.c 10701]
ERROR => W2 (pid 3044) died [dpxxdisp.c 10701]
ERROR => W3 (pid 3896) died [dpxxdisp.c 10701]
ERROR => W4 (pid 3904) died [dpxxdisp.c 10701]
ERROR => W5 (pid 3900) died [dpxxdisp.c 10701]
ERROR => W6 (pid 2496) died [dpxxdisp.c 10701]
ERROR => W7 (pid 3316) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x3f --> 0x3e
ERROR => W8 (pid 3840) died [dpxxdisp.c 10701]
ERROR => W9 (pid 456) died [dpxxdisp.c 10701]
ERROR => W10 (pid 2116) died [dpxxdisp.c 10701]
ERROR => W11 (pid 2944) died [dpxxdisp.c 10701]
ERROR => W12 (pid 244) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x3e --> 0x3c
ERROR => W13 (pid 3820) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x3c --> 0x38
ERROR => W14 (pid 2732) died [dpxxdisp.c 10701]
ERROR => W15 (pid 3580) died [dpxxdisp.c 10701]
ERROR => W16 (pid 1964) died [dpxxdisp.c 10701]
ERROR => W17 (pid 3456) died [dpxxdisp.c 10701]
ERROR => W18 (pid 3680) died [dpxxdisp.c 10701]
ERROR => W19 (pid 2076) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x38 --> 0x30
ERROR => W20 (pid 1264) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x30 --> 0x20
ERROR => W21 (pid 2756) died [dpxxdisp.c 10701]
ERROR => W22 (pid 2740) died [dpxxdisp.c 10701]
my types changed after wp death/restart 0x20 --> 0x0
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1832 (SIGUSR2)
ERROR => DpWpKill(1832, SIGUSR2) failed [dpxxtool.c 2687]
killing W1-2492 (SIGUSR2)
ERROR => DpWpKill(2492, SIGUSR2) failed [dpxxtool.c 2687]
killing W2-3044 (SIGUSR2)
ERROR => DpWpKill(3044, SIGUSR2) failed [dpxxtool.c 2687]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2687]
killing W4-3904 (SIGUSR2)
ERROR => DpWpKill(3904, SIGUSR2) failed [dpxxtool.c 2687]
killing W5-3900 (SIGUSR2)
ERROR => DpWpKill(3900, SIGUSR2) failed [dpxxtool.c 2687]
killing W6-2496 (SIGUSR2)
ERROR => DpWpKill(2496, SIGUSR2) failed [dpxxtool.c 2687]
killing W7-3316 (SIGUSR2)
ERROR => DpWpKill(3316, SIGUSR2) failed [dpxxtool.c 2687]
killing W8-3840 (SIGUSR2)
ERROR => DpWpKill(3840, SIGUSR2) failed [dpxxtool.c 2687]
killing W9-456 (SIGUSR2)
ERROR => DpWpKill(456, SIGUSR2) failed [dpxxtool.c 2687]
killing W10-2116 (SIGUSR2)
ERROR => DpWpKill(2116, SIGUSR2) failed [dpxxtool.c 2687]
killing W11-2944 (SIGUSR2)
ERROR => DpWpKill(2944, SIGUSR2) failed [dpxxtool.c 2687]
killing W12-244 (SIGUSR2)
ERROR => DpWpKill(244, SIGUSR2) failed [dpxxtool.c 2687]
killing W13-3820 (SIGUSR2)
ERROR => DpWpKill(3820, SIGUSR2) failed [dpxxtool.c 2687]
killing W14-2732 (SIGUSR2)
ERROR => DpWpKill(2732, SIGUSR2) failed [dpxxtool.c 2687]
killing W15-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2687]
killing W16-1964 (SIGUSR2)
ERROR => DpWpKill(1964, SIGUSR2) failed [dpxxtool.c 2687]
killing W17-3456 (SIGUSR2)
ERROR => DpWpKill(3456, SIGUSR2) failed [dpxxtool.c 2687]
killing W18-3680 (SIGUSR2)
ERROR => DpWpKill(3680, SIGUSR2) failed [dpxxtool.c 2687]
killing W19-2076 (SIGUSR2)
ERROR => DpWpKill(2076, SIGUSR2) failed [dpxxtool.c 2687]
killing W20-1264 (SIGUSR2)
ERROR => DpWpKill(1264, SIGUSR2) failed [dpxxtool.c 2687]
killing W21-2756 (SIGUSR2)
ERROR => DpWpKill(2756, SIGUSR2) failed [dpxxtool.c 2687]
killing W22-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2687]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
Wed Oct 01 14:40:38 2008
NiISelect: TIMEOUT occured(10000 msecs)
dump system status
dump system status
Workprocess Table (long) Wed Oct 01 04:40:38 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 1832 Ended no 1 0 0
1 DIA 2492 Ended no 1 0 0
2 DIA 3044 Ended no 1 0 0
3 DIA 3896 Ended no 1 0 0
4 DIA 3904 Ended no 1 0 0
5 DIA 3900 Ended no 1 0 0
6 DIA 2496 Ended no 1 0 0
7 DIA 3316 Ended no 1 0 0
8 UPD 3840 Ended no 1 0 0
9 UPD 456 Ended no 1 0 0
10 UPD 2116 Ended no 1 0 0
11 UPD 2944 Ended no 1 0 0
12 UPD 244 Ended no 1 0 0
13 ENQ 3820 Ended no 1 0 0
14 BTC 2732 Ended no 1 0 0
15 BTC 3580 Ended no 1 0 0
16 BTC 1964 Ended no 1 0 0
17 BTC 3456 Ended no 1 0 0
18 BTC 3680 Ended no 1 0 0
19 BTC 2076 Ended no 1 0 0
20 SPO 1264 Ended no 1 0 0
21 UP2 2756 Ended no 1 0 0
22 UP2 2740 Ended no 1 0 0
Dispatcher Queue Statistics Wed Oct 01 04:40:38 2008
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 1 | 2000 | 1 | 1 |
--------
+
DIA | 4 | 4 | 2000 | 4 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 1 | 1 | 2000 | 1 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 9
wake_evt_udp_now 0
wake events total 5, udp 3 ( 60%), shm 2 ( 40%)
since last update total 5, udp 3 ( 60%), shm 2 ( 40%)
Dump of tm_adm structure: Wed Oct 01 04:40:38 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Oct 01 04:40:38 2008
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
Wed Oct 01 14:40:43 2008
NiISelect: TIMEOUT occured(5000 msecs)
DpHalt: shutdown server >SAPDRQ_DRQ_00 <
Switch off Shared memory profiling
DpWakeUpWps: wake up all wp's
killing process (1408) (SOFT_KILL)
[DpProcDied] Process lives (PID:1408 HANDLE:1560)
wait for end of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Wed Oct 01 14:40:44 2008
NiISelect: TIMEOUT occured(1000 msecs)
[DpProcDied] Process died (PID:1408 HANDLE:1560)
DpStartStopMsg: send stop message (myname is >SAPDRQ_DRQ_00 <)
NiBufSend starting
NiIWrite: write 458, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 458 bytes
send msg (len 110+348) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiIRead: read 181, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=181
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 181 bytes
MSG received, len 110+71, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 71 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiISelect: timeout 0 ms
DpHalt: no more messages from the message server
DpHalt: get hardware id to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_GET_HWID ok
Send 4 bytes to MSG_SERVER
NiPRead: WSAEWOULDBLOCK 1.time 4
NiISelect: timeout 5000 ms
NiIRead: read 214, 1 packs, MESG_IO, handle 3, data complete
NiBufIn: NIBUF len=214
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 214 bytes
MSG received, len 110+104, flag 3, from MSG_SERVER, typ 0, key -
Received 104 bytes from MSG_SERVER
Received opcode MS_GET_HWID from msg_server, reply MSOP_OK
MsOpReceive: ok
MsGetHardwareId : Hardware Id >G0606866136<
NiPRead: WSAEWOULDBLOCK 1.time 4
NiISelect: timeout 1000 ms
Wed Oct 01 14:40:45 2008
NiISelect: TIMEOUT occured(1000 msecs)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 8589]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, handle 3, data complete
MsINiWrite: sent 110 bytes
send logout to msg_server
call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/23
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
put request into queue (reqtype 1, prio LOW, rq_id 11)
MBUF component DOWN
NiBufClose: clear extensions for handle 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close nihandle-socket 3-1564
detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1860) [dpxxdisp.c 7267]
Good Bye .....
Hi,
This may be related to the solution from note 162266, chapter "Steps RFCRSWBOINI_IND_IND and RFCRADDBDIF_IND_IND".
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
This issue was releated to the environment setting on the server
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
If dispatchers stopped , then there are few reasons
1. oracle listener stopped
2. loopback does not defined in the " etc " host file
According to trace file says , loop back adaptor is not defined in your system. otherwise please check it oracle listener in the services list.
Reply me
Regards
MLN
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi, check dev_w0. Also other information about OS, DB, patch levels and other info.
Regadrs.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.