on 09-23-2008 9:40 AM
Hello All,
I am faceing error in SCOT configuartion wise.
I have given my recepient Address/type as INT and recepient Address my id and when i am goto menu Routes->Explain
instead of 3 green colors i am getting last one in RED and message for the error one is like CANNOT PROCESS MESSAGE, NO ROUTE FROM XXXX(USERNAME) to recepient Address .
How to rectify this error.
Thks
Hi
Check the SMTP configuration guide
http://help.sap.com/saphelp_nw70/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
Thanks!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Answered
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Closed
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Balu,
Have you selected Node in Use in smtp config? Chk if u hvnt.
Thanks!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
The content of OSS note is as follows.
please follow the below mentioned steps to resolve exception.
Symptom
The following error occurs when you send a document via Internet mail:
Internal error: SO_OBJECT_GET_MIME exception: 0 or
Internal error: SO_OBJECT_GET_MIME exception: 2
Other terms
SAPconnect, SMTP, XS829, SO_OBJECT_MIME_GET
Reason and Prerequisites
This error occurs when you send a mail via the SMTP node and can have several causes:
1. Default domain not set
2. Default code page not set (only with multi-codepage systems)
3. Code page not suitable for sending mail
4. COMMIT WORK is missing (programming error)
5. Workplace plug-in is missing
Solution
Activate the SAPconnect trace and resend the document if necessary. The next time the SAPconnect send job is running, search for the entries marked in red in the SAPconnect trace of the document. The applicable solutions, depending on these entries, are listed below:
1. Default domain not set
Trace entries:
BCS->MIME_MESSAGE_GENERATE
Sender Address Not Found 80
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: SENDER_BCS
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
or:
BCS->MIME_MESSAGE_GENERATE
Error during MIME Flow Generation
BCS->MIME_MESSAGE_GENERATE
Error During Automatic Determinaton of Default Internet Domain
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MIME_BCS
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must set the domain of the SAP System (Settings --> Default Domain).
2. Default code page not set (only with multi-codepage systems)
Trace entries:
CL_BCOM_MIME->GET_CODEPAGE
Termination: Multi-Codepage Systems Not Supported
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must specify a code page on the SMTP node.
3. Code page not suitable for sending mail
Trace entries:
CL_BCOM_MIME->GET_CHARSET
Termination: Charset Cannot Be Determined for SAP Code Page
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution: In the SAPconnect Administration (transaction SCOT), you must specify a code page (an entry is available in table TCP00A) that is suitable for sending mail on the SMTP node.
4. COMMIT WORK is missing (programming error)
Trace entries:
SO_OBEJECT_MIME_GET
No Send Order Exists -> Termination
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
Solution: See note 429427 for the correction.
5. Configuration for the sending of Business Objects
An attempt is made to send a document of type OBJ to an external recipient. This requires a conversion to TXT/HTML format, but the necessary modules are not configured correctly.
Trace entries:
SX_OBJECT_CONVERT_OBJ_HTM
Converting Document Format from OBJ to TXT/HTML
SO_OBEJECT_MIME_GET
No MIME Document Received. Error Code: MNA_DOC
SX_GENERATE_NDR
Internal Error: SO_OBJECT_MIME_GET Exception: 0
or
SX_GENERATE_NDR
Internal error: SO_OBJECT_MIME_GET Exception: 2
Solution:
Please refer to Note 530932.
warm regards
mahesh.
Hi Balu,
Plz do as follow.
1. Set your email id in Tcode SU01.
2. goto scot select smtp node and configure your server settings.
3. In SMTP configuration screen select Internet option other then FAX and Pager.
4. Double click on the set button correspponding to the Internet.
5. In set property write your email id as mentioned in SU01 in address field and try again it should work for all three steps.
Save all the settings b4 exiting.
Thanks!
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
My SMTPnode is already been configure according to your suggestion before.
Mail Host - Local Host
Mail Port - 25
Code Page - No conversion into other character string.
I have selected only INTERNET from support address type.
In the Address area i have given the address that i have given in SU01.
But still it is not working please help me further.
Hi Balu,
once u entered in to t.code 'scot'.
press F7, then u can able to see the node.
with your system ID, under which u can find the
addrsesing type and are.
next press ctrl+F6- to create the route.
under your route,please provide the deatils as mentioned below.
i.e
Addr type- INT
Addressing area- u r id
node - use SMTP.
still u ahve problem, pls let us know.
warm regards
mahesh.
Hi Balu,
Check whether email ID is assigned to the User ID in SU01 transaction code.
Regards
B.Dheepa
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Cannot process message, no route from xxxxto xxx
Message no. XS826
Diagnosis
To continue processing, the system requires a valid route from sender xxxx to recipient xxxxx(type INT).
System Response
The action was terminated.
Error occurred in SAP in SAPconnect
Procedure
If this error was generated within the SAP system by SAPconnect, you have the following options:
Create a route (i.e. assign a suitable address area, which covers the above address, to a node).
1. Check whether the route exists, but the node to which it is assigned is not in operation. If this is the case, change the route or put the node into operation.
2. Change the recipient address if it has been entered incorrectly.
If the error was detected outside of the SAP system, please read the operator's manual for your communication software or contact the manufacturer.
warm regards
mahesh.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.