on 08-28-2008 6:59 AM
Hi,
When I try to start the SAP R/3 4. 6c WINDOWS VERSION using MMC, dispatch+work.EXE stopped.The dev_disp log is below
-
trc file: "dev_disp", trc level: 1, release: "46D"
-
Thu Aug 28 11:38:27 2008
relno 4640
patchlevel 0
patchno 2265
intno 0
pid 1852
***LOG Q00=> DpSapEnvInit, DPStart (00 1852) [dpxxdisp.c 921]
Thu Aug 28 11:38:32 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust your DNS settings [dpxxtool2.c 3170]
MtxInit: -2 0 0
DpIPCInit: start server >lionww_IDS_00 <
MBUF state OFF
MBUF opmode USE
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 512 MB
<ES> 511 blocks reserved for free list.
ES initialized.
ERROR => DpWpCreate: CreateProcess (1450: Unknown error) [dpntdisp.c 705]
***LOG Q0I=> DpWpCreate, CreateProcess ( CreateProcess1450) [dpntdisp.c 707]
*****************************************************
Memory diagnostic *
*****************************************************
Systeminformation
-
Processor-Typ : Intel Pentium Pro
Processor-Count : 2
Operating System : NT 5.0, Build 2195
Service Pack : Service Pack 4
-
NT Pagefile Informations
-
Config. minimum size : 10481664 K
Config. maximum size : 12576768 K
Avail. maximum size : 12576768 K
Num | Pagefile | Min.Size | Max.Size | Avail.Max | Curr.Size |
1 | C:\pagefile.sys | 2095104 K | 4190208 K | 4190208 K | 2095104 K |
2 | D:\pagefile.sys | 4193280 K | 4193280 K | 4193280 K | 4193280 K |
3 | E:\pagefile.sys | 4193280 K | 4193280 K | 4193280 K | 4193280 K |
-
NT Task Manager Informations
-
Total Handles : 7371
Total Threads : 429
Total Processes : 40
Commit Charge Total : 877096 K
Commit Charge Limit : 10973628 K
Commit Charge Peak : 877096 K
Phys.Memory Total : 523792 K
Phys.Memory Available : 237472 K
File Cache : 27420 K
Kernel Memory Total : 26344 K
Kernel Memory Paged : 17692 K
Kernel Memory Nonpaged : 8652 K
-
Memory usage of current process
-
Total virt.address space : 2097024 K
Avail.virt.address space : 1438108 K
Private Pages : 38636 K
Total heap size : 9210 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4992 K
Allocated heap memory : 3002 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
-
Memory usage of all processes
-
PID | Image | Instance | Work.Set | WS Peak | Priv.Pages | PP Peak | Pg Fault |
8 | 272 K | 708 K | 24 K | 112 K | 2 | ||
196 | smss.exe | 376 K | 2028 K | 1080 K | 2764 K | 0 | |
244 | winlogon.exe | 6280 K | 8196 K | 5296 K | 7788 K | 3 | |
272 | services.exe | 7664 K | 7748 K | 4184 K | 4948 K | 2 | |
284 | lsass.exe | 5064 K | 5068 K | 2552 K | 2584 K | 1 | |
400 | termsrv.exe | 3312 K | 3352 K | 1888 K | 22412 K | 0 | |
500 | svchost.exe | 3424 K | 3436 K | 1424 K | 1452 K | 1 | |
536 | spoolsv.exe | 4172 K | 4316 K | 2488 K | 2644 K | 1 | |
564 | msdtc.exe | 5264 K | 5296 K | 1844 K | 1868 K | 1 | |
692 | svchost.exe | 9840 K | 10392 K | 5964 K | 6712 K | 3 | |
720 | llssrv.exe | 1880 K | 1888 K | 680 K | 692 K | 0 | |
756 | sqlservr.exe | 129696 K | 129916 K | 126104 K | 128144 K | 32 | |
832 | regsvc.exe | 956 K | 964 K | 260 K | 272 K | 0 | |
884 | MSTask.exe | 2856 K | 2864 K | 1004 K | 1044 K | 0 | |
1004 | WinMgmt.exe | 284 K | 6668 K | 832 K | 2268 K | 6 | |
1020 | svchost.exe | 4604 K | 4624 K | 3280 K | 3304 K | 1 | |
1032 | inetinfo.exe | 9236 K | 9552 K | 6096 K | 6420 K | 5 | |
1144 | Dfssvc.exe | 1444 K | 1456 K | 416 K | 432 K | 0 | |
1304 | sqlagent.exe | 2788 K | 4888 K | 2224 K | 2556 K | 2 | |
1488 | svchost.exe | 3056 K | 3104 K | 1416 K | 1476 K | 0 | |
1452 | winlogon.exe | 7228 K | 31296 K | 8452 K | 31700 K | 44 | |
1604 | rdpclip.exe | 1144 K | 1144 K | 336 K | 336 K | 0 | |
2040 | Explorer.EXE | 5680 K | 8772 K | 5116 K | 5164 K | 57 | |
1944 | jusched.exe | 1212 K | 1212 K | 316 K | 316 K | 0 | |
640 | internat.exe | 1420 K | 1424 K | 308 K | 312 K | 0 | |
1704 | sqlmangr.exe | 3976 K | 5624 K | 1180 K | 2652 K | 1 | |
2128 | logon.scr | 920 K | 920 K | 268 K | 268 K | 0 | |
1560 | conime.exe | 1020 K | 1020 K | 224 K | 224 K | 0 | |
512 | mmc.exe | 3244 K | 7700 K | 4744 K | 4900 K | 8 | |
1952 | SAPSTARTSRV.EXE | 5652 K | 6588 K | 5636 K | 6316 K | 6 | |
1872 | WORDPAD.EXE | 1924 K | 4068 K | 964 K | 1004 K | 1 | |
1672 | mdm.exe | 2456 K | 2580 K | 716 K | 760 K | 0 | |
1856 | WORDPAD.EXE | 4088 K | 4100 K | 1076 K | 1120 K | 1 | |
1568 | msg_server.exe | [MS] IDS_00 | 5668 K | 5668 K | 6160 K | 12808 K | 1 |
1852 | disp+work.exe | 16028 K | 16052 K | 38636 K | 38672 K | 9 | |
1600 | disp+work.EXE | [WP] IDS_00 | 24016 K | 24016 K | 38960 K | 38960 K | 5 |
Sum | 288144 K | 282148 K |
Thu Aug 28 11:38:33 2008
ERROR => DpWpDynCreate: DpWpCreate [dpntdisp.c 212]
ERROR => DpProcCreate: DpWpDynCreate [dpxxdisp.c 8841]
DP_FATAL_ERROR => DpSapEnvInit: DpProcCreate
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2116 (SIGUSR2)
ERROR => DpWpKill(2116, SIGUSR2) failed [dpxxtool.c 2680]
killing W1-1848 (SIGUSR2)
ERROR => DpWpKill(1848, SIGUSR2) failed [dpxxtool.c 2680]
killing W2-1600 (SIGUSR2)
ERROR => DpWpKill(1600, SIGUSR2) failed [dpxxtool.c 2680]
killing W3-172 (SIGUSR2)
ERROR => DpWpKill(172, SIGUSR2) failed [dpxxtool.c 2680]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
ERROR => DpWpKill: wrong pid (-1) [dpxxtool.c 2602]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
Thu Aug 28 11:38:43 2008
NiISelect: TIMEOUT occured(10000 msecs)
dump system status
dump system status
Workprocess Table (long) Thu Aug 28 03:38:43 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 2116 Run no 0 0 0
1 DIA 1848 Run no 0 0 0
2 DIA 1600 Run yes 0 0 0
3 DIA 172 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 UPD -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 UPD -1 Run no 0 0 0
8 ENQ -1 Run no 0 0 0
9 BTC -1 Run no 0 0 0
10 SPO -1 Run no 0 0 0
11 UP2 -1 Run no 0 0 0
12 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Thu Aug 28 03:38:43 2008
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 2 | 2 | 2000 | 2 | 0 |
--------
+
DIA | 0 | 0 | 2000 | 0 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 2
wake_evt_udp_now 1
wake events total 2, udp 1 ( 50%), shm 1 ( 50%)
since last update total 2, udp 1 ( 50%), shm 1 ( 50%)
Dump of tm_adm structure: Thu Aug 28 03:38:43 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Aug 28 03:38:43 2008
=============================
Slots: 300, Used: 2, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
80 | DISPATCHER | -1 | WPCAAD080 |
81 | DISPATCHER | -1 | WPCAAD081 |
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
Thu Aug 28 11:38:48 2008
NiISelect: TIMEOUT occured(5000 msecs)
DpHalt: shutdown server >lionww_IDS_00 <
Switch off Shared memory profiling
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 died (PID:2116 HANDLE:376)
[DpWpDied] W1 died (PID:1848 HANDLE:368)
[DpWpDied] W2 lives (PID:1600 HANDLE:360)
[DpWpDied] W3 died (PID:172 HANDLE:352)
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
Thu Aug 28 11:38:49 2008
NiISelect: TIMEOUT occured(1000 msecs)
wait for end of exclusive shutdown
[DpWpDied] W0 handle not set (PID:2116)
[DpWpDied] W1 handle not set (PID:1848)
[DpWpDied] W2 died (PID:1600 HANDLE:360)
[DpWpDied] W3 handle not set (PID:172)
killing process (1240) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 424]
[DpWpDied] W0 handle not set (PID:2116)
[DpWpDied] W1 handle not set (PID:1848)
[DpWpDied] W2 handle not set (PID:1600)
[DpWpDied] W3 handle not set (PID:172)
[DpProcDied] Process died (PID:1240 HANDLE:384)
not attached to the message server
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 1852) [dpxxdisp.c 7255]
Good Bye .....
-
can anybody give me some advice ?
#.******************************************************************************
#.* *
#.* Instance profile IDS_DVEBMGS00_LIONWW *
#.* *
#.* Version = 000006 *
#.* Generated by user = YU *
#.* Generated on = 05.12.2007 , 16:40:23 *
#.* *
#.******************************************************************************
#parameter created by: LIUBIN 05.12.2007 10:37:03
install/codepage/db/non_transp = 8400
#parameter created by: LIUBIN 05.12.2007 10:36:41
install/codepage/db/transp = 8400
#parameter created by: LIUBIN 05.12.2007 10:35:30
install/codepage/appl_server = 8400
#parameter created by: YU 05.12.2007 10:22:33
#old_value: 1 changed: YU 05.12.2007 10:22:50
#old_value: E changed: YU05.12.2007 10:25:46
#old_value: 1 changed: LIUBIN 05.12.2007 10:34:53
zcsa/second_language = E
#parameter created by: YU 05.12.2007 10:21:04
login/system_client = 400
SAPSYSTEMNAME = IDS
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = lionww
rdisp/wp_no_dia = 5
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 2
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 1
rdisp/wp_no_spo = 1
#parameter created by: YU 05.12.2007 10:24:17
#old_value: DE1 changed: YU05.12.2007 10:24:44
#old_value: DE changed: LIUBIN 05.12.2007 10:34:37
#old_value: DE1 changed: YU05.12.2007 16:40:21
zcsa/installed_languages = 1ED
#
#
#
#old_value: 1 changed: YU05.12.2007 10:25:31
#old_value: E changed: YU 05.12.2007 10:26:22
#old_value: 1 changed: YU05.12.2007 10:26:28
#old_value: E changed: LIUBIN 05.12.2007 10:34:53
zcsa/system_language = 1
PHYS_MEMSIZE = 1126
#parameter created by: YU 05.12.2007 16:40:21
abap/buffersize = 150000
#parameter created by: YU 05.12.2007 16:40:21
zcsa/table_buffer_area = 6000640
#parameter created by: YU 05.12.2007 16:40:21
rtbb/buffer_length = 2000
#parameter created by: YU 05.12.2007 16:40:21
rsdb/cua/buffersize = 3000
#parameter created by: YU 05.12.2007 16:40:21
zcsa/presentation_buffer_area = 4400128
#parameter created by: YU 05.12.2007 16:40:21
rdisp/appc_ca_blk_no = 100
#parameter created by: YU 05.12.2007 16:40:21
rdisp/wp_ca_blk_no = 300
#parameter created by: YU 05.12.2007 16:40:21
rsdb/ntab/entrycount = 20000
#parameter created by: YU 05.12.2007 16:40:21
rsdb/ntab/ftabsize = 30000
#parameter created by: YU 05.12.2007 16:40:21
rsdb/ntab/irbdsize = 6000
#parameter created by: YU 05.12.2007 16:40:21
rsdb/ntab/sntabsize = 3000
#parameter created by: YU 05.12.2007 16:40:21
DIR_ROLL = E:\usr\sap\IDS\DVEBMGS00\data
#parameter created by: YU 05.12.2007 16:40:21
DIR_PAGING = E:\usr\sap\IDS\DVEBMGS00\data
#parameter created by: YU 05.12.2007 16:40:21
DIR_DATA = E:\usr\sap\IDS\DVEBMGS00\data
#parameter created by: YU 05.12.2007 16:40:21
DIR_REORG = E:\usr\sap\IDS\DVEBMGS00\data
#parameter created by: YU 05.12.2007 16:40:21
DIR_TRANS =
lionww\sapmnt\trans
#parameter created by: YU 05.12.2007 16:40:21
DIR_TEMP = .
#parameter created by: YU 05.12.2007 16:40:21
DIR_SORTTMP = E:\usr\sap\IDS\DVEBMGS00\data
#parameter created by: YU 05.12.2007 16:40:21
abap/use_paging = 0
#parameter created by: YU 05.12.2007 16:40:21
ztta/roll_first = 512
#parameter created by: YU 05.12.2007 16:40:21
ztta/roll_area = 2000896
#parameter created by: YU 05.12.2007 16:40:21
rdisp/ROLL_SHM = 19456
#parameter created by: YU 05.12.2007 16:40:21
rdisp/ROLL_MAXFS = 19456
#parameter created by: YU 05.12.2007 16:40:21
rdisp/PG_SHM = 8832
#parameter created by: YU 05.12.2007 16:40:21
rdisp/PG_MAXFS = 32768
#parameter created by: YU 05.12.2007 16:40:21
abap/heap_area_dia = 2000683008
#parameter created by: YU 05.12.2007 16:40:21
abap/heap_area_nondia = 2000683008
#parameter created by: YU 05.12.2007 16:40:21
abap/heap_area_total = 2000683008
#parameter created by: YU 05.12.2007 16:40:21
abap/heaplimit = 40894464
#parameter created by: YU 05.12.2007 16:40:21
abap/swap_reserve = 20971520
#parameter created by: YU 05.12.2007 16:40:21
ztta/roll_extension = 2000683008
#parameter created by: YU 05.12.2007 16:40:21
em/initial_size_MB = 1126
#parameter created by: YU 05.12.2007 16:40:21
em/blocksize_KB = 512
#parameter created by: YU 05.12.2007 16:40:21
em/stat_log_size_MB = 20
#parameter created by: YU 05.12.2007 16:40:21
em/stat_log_timeout = 600
#parameter created by: YU 05.12.2007 16:40:21
em/address_space_MB = 512
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kaushal Malavia ,
Thanks for your help.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Did you change any parameter .Please paste dev_w0 here.And alsocheck in services file port 32XX .
karan
Edited by: karan Singh on Sep 2, 2008 12:49 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Looks like your dispatcher may have problems starting up the processes. Check the O/S event log to see if you can find anything. Lastly, make sure that your message server is up, check the dev_ms and make sure it says "listening on port XXXX".
Also, try downloading the latest kernel from service.sap.com, make sure you download the right ones (windows 32 vs 64bit, IA64 vs X64, etc.).
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hai,
Check my rebooting the server. Also check the database status,whether it is opened or not. If the database is in corrupt state,the SAP will not start.
Increase the Pagefile and check.
Thanks and Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
90 | |
10 | |
10 | |
10 | |
7 | |
7 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.