on 08-12-2008 11:50 AM
Hi gurus :
Last day aug 7 , our system get a dump in Tx ST22 and DISP+WORK get stoped and cant start ...
We restart about 4 times for Disp+work get status runing .
Can somebody say me what happen ??
Errors SYSLOG SAPMMC
SAP-Basis System: Stop Msg Server, PID 8076
SAP-Basis System: Start Msg Server, 1 times since system startup. PID 8552
SAP-Basis System: Operating system call recv failed (error no. 10054)
SAP-Basis System: Client sapsrmex1_SSX_02 is not known to the message server
DUMP ST22
Runtime Errors SYSTEM_CANCELED
Date and Time 07.08.2008 02:36:30
Short text
The program "SAPLSENA" was terminated manually.
What happened?
The current program "SAPLSENA" has been terminated by another mode.
What can you do?
This is no program error. Therefore, no counter measures are
necessary.
No error that requires action
Error analysis
The current program has been terminated from another mode, e.g. with
Transaction SM50.
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Server sapsrmex2_SSX_02 on host sapsrmex2 (wp 28)"
Version.............. 38
Error code........... "-10"
Error text........... "partner '10.128.29.133:sapdp00' not reached"
Description.......... "NiPConnect2"
System call.......... "connect"
Module............... "nixxi.cpp"
Line................. 2764
The error reported by the operating system is:
Error number..... 10061
Error text....... "WSAECONNREFUSED: Connection refused"
Check the host name and service that define the remote program. Are
these parameters correct? You can use the "ping" command to check
whether the specified host is reachable. If the remote program is an
application server, check whether it is running and whether the local
gateway of this server is listening for the specified service. If the
service is sapgw<nn>, the remote server must run with SAPSYSTEM number
<nn>.
How to correct the error
No error elimination is necessary.
System environment
SAP-Release 700
Application server... "sapsrmex2"
Network address...... "10.128.29.131"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 28
Shortdump setting.... "full"
Database server... "sporaex1"
Database type..... "ORACLE"
Database name..... "SSX"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 30 2006 00:29:20"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 83
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 0
MM Used. 805168
MM Free. 238648
User and Transaction
Client.............. 000
User................ "SAPSYS"
Language key........ "S"
Transaction......... " "
Transactions ID..... " "
Program............. "SAPLSENA"
Screen.............. "############################################"
Screen line......... 0
Terrmation on where terminated
Termination occurred in the ABAP program "SAPLSENA" - in "FLUSH_PACKAGE".
The main program was "SAPLSPOA ".
In the source code you have the termination point in line 229
of the (Include) program "LSENAF01".
Hi,
You can look for the error as Mudari and Ashok has guided.If no help then try this>stop you SAP MMC>go to services-->restart all your Database(oracle/SQL..etc) services and then try restarting the SAP MMC.
Hope this will work.
Regards,
Ashutosh
Edited by: ashutosh singh on Aug 12, 2008 1:14 PM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Avelino,
From the dump it seems that the system was made down manually.
Is your sap is completely down or some workprocess.
You check below things
1) SAPOSCOL is running
2) Database is running
Also paste the trace dev_w0 from directory usr\sap\<sid>\instance\work.
This trace file will contain the error information.
Regards
Ashok
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi avelino,
seems that dispatcher is not reaching the message server.
check ur network settings and ping to the server.
also paste the dev_msg and dev_disp traces file from work directory.
in the dump it was mentioned like connection refused.
may be the network problem. just check ur network settings.
also refer note :: 932228 .
regards,
bhupesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi :
I get this TRC file from aug 7 ...... I need say to the company what happen this day ........
I think was a problem with network but i dont sure....
-
Thu Aug 07 02:29:26 2008
opened by SAP_CMACCP (version=700.2006.09.13)
NiInit3: NI already initialized; param 'maxHandles' ignored (1;402)
CPIC (version=700.2006.09.13)
Thu Aug 07 02:29:27 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1584
(SI_ECONN_REFUSE; I4; ST; 10.128.29.130:3302) [nixxi.cpp 2764]
ERROR => GwIConnect: GwConnect to sapsrmex1 / 3302 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
***LOG S0S=> GwIConnect, GwConnect (3302) [gwxx.c 301]
***LOG S90=> SAP_CMNOREGTP, GwIConnect ( 236) [r3cpic.c 9339]
*****************************************************************************
*
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.128.29.130:3302' not reached
*
TIME Thu Aug 07 02:29:27 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
*
*****************************************************************************
Thu Aug 07 02:29:28 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2764]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1584
(SI_ECONN_REFUSE; I4; ST; 10.128.29.130:3302) [nixxi.cpp 2764]
ERROR => GwIConnect: GwConnect to sapsrmex1 / 3302 failed (rc=NIECONN_REFUSED) [gwxx.c 296]
***LOG S0T=> GwIConnect, GwConnect (-0010) [gwxx.c 297]
***LOG S0R=> GwIConnect, GwConnect () [gwxx.c 299]
***LOG S0S=> GwIConnect, GwConnect (3302) [gwxx.c 301]
***LOG S90=> SAP_CMREGTP2, GwIConnect ( 236) [r3cpic.c 9624]
*****************************************************************************
*
LOCATION CPIC (TCP/IP) on local host
ERROR partner '10.128.29.130:3302' not reached
*
TIME Thu Aug 07 02:29:28 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
*
Hi,
Dont jump to a conclusion that this is a n/w problem.As you said your dispatcher is not starting so do once as I had guided in my earlier post.Also for logs check dev_wo and dev_disp files in \usr\sap\sid\DVEBMGSxx\work as bhasker has said.
After analyzing everything and also restarting the database services nothing work then only go and co-ordinate with your n/w team.
Regards,
Ashutosh
Edited by: ashutosh singh on Aug 12, 2008 1:45 PM
Hi :
Thanks for all ur replies ...
+*DEVDISP*+_
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 02
sid SSX
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, Unicode, optimized
pid 2476
Mon Aug 11 08:16:28 2008
kernel runs with dp version 218000(ext=109000) (@(#) DPLIB-INT-VERSION-218000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 2476) [dpxxdisp.c 1239]
Mon Aug 11 08:16:29 2008
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Aug 11 08:16:33 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >sapsrmex1_SSX_02 <
DpShMCreate: sizeof(wp_adm) 36608 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=5400/8/432056/432064
DpShMCreate: sizeof(file_adm) 432064 (72)
DpShMCreate: sizeof(vmc_adm) 38880 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06790040, size: 5142616)
DpShMCreate: allocated sys_adm at 06790040
DpShMCreate: allocated wp_adm at 06791E40
DpShMCreate: allocated tm_adm_list at 0679AD40
DpShMCreate: allocated tm_adm at 0679AD70
DpShMCreate: allocated wp_ca_adm at 06B6A010
DpShMCreate: allocated appc_ca_adm at 06B6FDD0
DpShMCreate: allocated comm_adm at 06B71D10
DpShMCreate: allocated file_adm at 06BF2BD0
DpShMCreate: allocated vmc_adm_list at 06C5C390
DpShMCreate: allocated gw_adm at 06C5C3D0
DpShMCreate: allocated vmc_adm at 06C5C400
DpShMCreate: allocated ca_info at 06C65BE0
DpShMCreate: allocated wall_adm at 06C65BE8
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 5400 entries
DpSesCreateTable: created session table at 06CF0040 (len=138424)
Mon Aug 11 08:16:34 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
DpVmcInit2: o.k.
Mon Aug 11 08:16:36 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3240
argv[0] = C:\usr\sap\SSX\DVEBMGS02\exe\jcontrol.EXE
argv[1] = C:\usr\sap\SSX\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=
sapsrmex\sapmnt\SSX\SYS\profile\SSX_DVEBMGS02_sapsrmex1
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=4010
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=SSX
argv[7] = -DSAPMYNAME=sapsrmex1_SSX_02
argv[8] = -DSAPPROFILE=
sapsrmex\sapmnt\SSX\SYS\profile\SSX_DVEBMGS02_sapsrmex1
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Aug 11 08:16:37 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1625]
***LOG Q0K=> DpMsAttach, mscon ( sapsrmex) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapsrmex1_SSX_02 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Mon Aug 11 08:16:56 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Aug 11 08:18:17 2008
J2EE server info
start = TRUE
state = ACTIVE
pid = 3240
http = 50200
https = 50201
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework
Mon Aug 11 08:22:24 2008
change reqtype of W14 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req (14BTCDIA) [dpxxdisp.c 13641]
change reqtype of W15 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req (15BTCDIA) [dpxxdisp.c 13641]
Mon Aug 11 08:46:57 2008
ERROR => DpRqCheck: T45 in state TM_SLOT_FREE [dpxxdisp.c 6834]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 5184]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3461): [dpxxdisp.c 5186]
-IN-- sender_id IC_MAN tid 45 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_DP uid 449 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 6168
-IN-- req_info DP_SOFT_CANCELDP_ICM_EVENT
ERROR => invalid MPI handle: 0 [mpixx.c 2228]
ERROR => invalid MPI handle: 0 [mpixx.c 2228]
Mon Aug 11 09:11:16 2008
SoftCancel request for T40 U750 M0 received from IC_MAN
SoftCancel request for T37 U751 M0 received from IC_MAN
SoftCancel request for T29 U752 M0 received from IC_MAN
SoftCancel request for T39 U749 M0 received from IC_MAN
SoftCancel request for T38 U748 M0 received from IC_MAN
Mon Aug 11 14:46:39 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6896]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5184]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5979): [dpxxdisp.c 5186]
-IN-- sender_id IC_MAN tid 30 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 8121 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 39086
-IN-- req_info DP_ICM_EVENT
-IN-- mpi rq <4d1> mpi resp <4d2> prot 1 obj fd -1 rq_id 0
-IN-- icm_opcode: ICM_PLUGIN_REQUEST
Mon Aug 11 15:29:07 2008
SoftCancel request for T26 U6597 M2 received from REMOTE_TERMINAL
Mon Aug 11 16:06:58 2008
SoftCancel request for T26 U9144 M0 received from IC_MAN
Tue Aug 12 09:08:58 2008
SoftCancel request for T157 U21348 M0 received from IC_MAN
Tue Aug 12 10:06:39 2008
SoftCancel request for T97 U22219 M0 received from IC_MAN
SoftCancel request for T55 U22217 M0 received from IC_MAN
SoftCancel request for T114 U22218 M0 received from IC_MAN
Tue Aug 12 12:57:31 2008
SoftCancel request for T181 U25003 M0 received from REMOTE_TERMINAL
Tue Aug 12 12:57:50 2008
ERROR => DpRqCheck: T181 in state TM_SLOT_FREE [dpxxdisp.c 6834]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5184]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5979): [dpxxdisp.c 5186]
-IN-- sender_id DISPATCHER tid 181 wp_ca_blk 20 wp_id 1
-IN-- action SEND_TO_WP uid 25003 appc_ca_blk -1 type DIA
-IN-- new_stat WP_WAIT mode 0 len 672 rq_id 32249
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH
Hi,
> ERROR => DpRqCheck: T45 in state TM_SLOT_FREE http://dpxxdisp.c 6834
>***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) http://dpxxdisp.c 5184
Check the Note 157246 - DpRqCheck: T22 in stat TM_SLOT_FREE
This is the cause for other issues (??)
Regards,
Srihari
User | Count |
---|---|
84 | |
24 | |
12 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.